BRAKE PADS REAR SINTERED SH TRW rear : Honda XRV 750 Africa Twin RD07 93-03 (H7-M7871668-RD07)

Milled aluminum body, spring strut can be adjusted by hand in spring preload via fine thread and rebound (30clicks).

Locking by means of threaded pin.

Setting tool included.

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD07 1993-2003 rear

EBC MX brake disc for offroad motorcycles. MADE IN UK.

The aim of the development is to improve the braking behavior compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is significantly more resistant to rust than cast steel. In addition, the entire surface is protected by a 3 micron thick zinc layer, which is already abraded in the area of ​​the brake lining contact zone when braking. It is only in this area that it is easier to form rust rust with a longer service life.

The brake discs are drilled in the bird's swing signal to get rid of the rainwater and brake dust with as few holes as possible while simultaneously cleaning the brake disc. The less drill holes are installed, the better the wet braking behavior and the lower the wear.

- Rigid brake disc.
- Made from heat-treated carbon steel.
- Braked surface with optimized hole pattern.
- Radially ground.
- Galvanized for protection against corrosion.
- EBC recommends EBC Organic TT brake pads or for sporty drivers EBC sintered brake blocks in R or MXS mixture.
- Stand-alone design.
- The thickness of the brake disc may vary from the original part.

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD07 1993-2003 rear

The JT Sprockets production is now the largest and most modern production facility for pinions and chain wheels worldwide,
equipped with the latest generation of CNC manufacturing machines.
JT Sprockets produces the entire program of pinions and chain wheels for the aftermarket and the original equipment.

Each pinion and sprocket passes through 25 production stages and is subjected to more than ten individual quality tests in order to successfully leave production.

JT Sprockets manufactures in the right way: by turning, milling and drilling! This is the only way to achieve the highest quality with the lowest tolerances and the best profile of the teeth.
After the subsequent heat remuneration, each article is tested by hand - so JT Sprockets sets new quality standards in the motorcycle industry.

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD07 1993-2003

DID is an OEM of many Japanese and European brands. Leading racing teams in the
Road and off-road sports rely on the technology of DID.

DID 525VX:
The successor to the tried and tested 525VM is also based on the long -
Experience of DID in the MotoGP and fulfills the highest demands through the use of the patented X-rings.

Compared to its predecessor, the 525VX has a much higher tensile strength and running performance.

- high durability and low friction due to patented X-ring

black outer pockets, black inner pockets

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD07 1993-2003

Drive shock absorber set Tourmax

Made in Japan

- serve to dampen the load change in the drive train
- worn shock absorbers are noticeable by increased play in the drive train and then lead to wear of the chain set

Price Unit: 1 Set

for Honda XRV 750 Africa Twin RD07 1993-2003 rear