Battery pole distributor for easy access to the motorcycle battery. Simply connect to both poles and in the future additional devices such as navigation devices or sockets for mobile phone chargers can easily be connected additionally.
- Protected connections -Easy construction -supply for + line - Length: 10 cm
Lithium ion battery with surge protection from Skyrich
Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM and Ducati. The Power Sports LTM-Line lithium-ion batteries are characterized by a heat-resistant, waterproof nylon housing and improved pole connections.
Overcharge protection (OP) The Skyrich battery has an advanced battery management system (BMS), which in addition to the balancers (ensures uniform charge / discharge of the battery) also includes an overvoltage protection. This prevents the battery from being charged with a voltage higher than 14.9V.
Spacer (S) Battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip, so that the battery fits exactly into the battery box.
Waterproof (WP) The battery is completely waterproof and takes no damage when the motorcycle is being cleaned with high pressure.
Indicator (I) All batteries are equipped with an improved charge indicator, which shows the state of charge of the battery even more precisely.
By replacing a standard lead-acid battery with a Skyrich lithium-ion battery, you can save up to 5 kg of weight without significant effort. The following advantages speak for Skyrich lithium-ion batteries: - integrated overvoltage protection - About 1/3 of the weight of the comparable lead-acid battery - improved pole connections made of brass for best conductivity - waterproof - completely black battery case - Battery housing made of nylon, therefore, deformation under heat is practically impossible - Unbeatable cost / weight savings ratio - Can be installed in any position, as it contains no acid - contains no heavy metals - balanced discharge / charge of all cells by balancers - Fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max 5% per month) - even at high temperatures still good performance up to 60 ° C - safe technology and long service life
Due to their specific properties, lead-acid batteries can only use 30% of their capacity, while lithium-ion batteries can use almost 100% of their capacity. For this reason, the lithium versions of the Skyrich batteries require only 1/3 the capacity of a comparable lead-acid battery for the same starting power. The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries using adapters. The connections are identical, which is why the battery can be replaced in just a few minutes without any further adjustments.
Please note that only suitable chargers may be used for charging. We recommend JMP chargers. For the maximum recommended charging currents, please refer to the technical data below.
Under no circumstances should chargers be used which attempt to desulphurate deep-discharged batteries under 10 volts with a voltage of more than 14.9 volts before they begin charging. There is a danger of explosion.
The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.
technology Skyrich lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium-polymer process in their manufacture. As a result, they can neither go up in flames nor explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium batteries.
- 12 V maintenance-free lithium-ion battery - Charging current recommended 2 A - maximum charge current for fast charge 20 A
- Maintenance-free JMT starter battery in proven and reliable brand quality. - The battery is already filled with a gel electrolyte and therefore absolutely leak-proof. - Longer life, increased cold-start performance and lower self-discharge compared to standard batteries. - Rattle Festival
Attention: for connection from above adapter 707.37.03 must be ordered separately.
Identical in construction to:
JM manufacturer number YB12A-A Varta manufacturer number 51211 GS manufacturer number GM12AZ-4A1, CB12A-A FB manufacturer number FB12A-A Fiamm manufacturer number 6S3P Exide manufacturer number EB12A-A
- Maintenance-free JMT starter battery in proven and reliable brand quality. - the battery is already filled with a gel electrolyte and therefore absolutely leak-proof. - longer service life, increased cold start performance and lower self-discharge compared to standard batteries. - Vibration resistant
- High power starter battery in reliable brand quality - High-performance glass fiber mats protect against vibration damage - Thanks to thin special separators in additional plates, the battery receives up to 30% higher cold starting power - Continuous cell connectors minimize the internal resistance and increase the performance - Sulfate-Stop significantly restricts the plate sulphation - By a connected battery housing prevents leakage and corrosion - Dry unfilled - An acid pack with the appropriate quantity of acid for initial filling is available separately
Restriction for Honda VFR 750 F Construction year 1996 to Chassis No. .. 2009620
Identical in construction to:
JM Manufacturer number YB12A-B Varta Manufacturer number 51215 GS manufacturer number GM12AZ-4B-2
With the JMP Battery Monitor II and the new and free Apple or Android App "JMP BatteryMonitor II" you are able to quickly and easily control the state of charge of your battery. Only with a stable, positive state of charge of the battery, the full capacity and usability is guaranteed.
The positive state of charge also prevents possible early damage or failure of the battery.
Due to the continuous recording, the state of charge of the battery is detected during trips and can also be recalled later. The file containing the data can be sent by email from the smartphone and displayed in Excel. So you can quickly see where the charging voltage has fallen or was too high. A faulty controller can be quickly recognized.
In addition, the new app can also be used to carefully check boot procedures (starters, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. Low battery or other issues may alert the driver depending on the settings in the app options.
After simply attaching it to the battery using eyelets and downloading the new Android or Apple app, the current voltage value can be retrieved.
The transmitter is suitable for 6 V and 12 V batteries. The range is about 10 meters. The connection is via Bluetooth. (Only from Bluetooth 4.0, eg from iPhone 4s, iPad3 or iPod Touch 5)
Please note: The new JMP Battery Monitor II also requires the new app JMP BatteryMonitor II "!
If the voltage drops below the minimum voltage, the battery will soon be recharged.
- Monitoring of 6 and 12 volts possible - Easy attachment through eyelets to the battery - Power consumption only about 2 ma - Reverse polarity will not damage the transmitter or the battery - Download the free app from the Apple App Store or the Google Play Store at JMP Battery Monitor II - Voltage recording even while driving. Result can be sent by e-mail. Display of the file in Excel possible.