Sprocket SUPERPINION 525 15T Honda XL 600 V Transalp PD10 1997-2000
Sprocket SUPERPINION 525 15T Honda XL 600 V Transalp PD10 1997-2000
Sprocket SUPERPINION 525 15T Honda XL 600 V Transalp PD10 1997-2000

Sprocket SUPERPINION 525 15T Honda XL 600 V Transalp PD10 1997-2000

Product No.:
11533-PD10
in stock - delivery time 2-4 day in stock - delivery time 2-4 day (abroad may vary)
59,90 EUR

incl. 20% tax excl. Shipping costs

Add to wish list
Description
A valid alternative to the any other pinion

The original pinion shapes have been remodeled to allow it to gripe ALL DENTATURE of the secondary transmission shaft
In order to pursue the objective, the locking type has also been changed, which is no longer in frontal but lateral mode.

• Prevents theet wear even with intensive use (off-road, racing)
• IT CARE THE DAMAGES created by the old sprockets, postponing the onerous SHAFT REPLACEMENT
• Being more stable, it facilitates constant alignment with the chain and crown, making the System movement move more smoothly and prolonging its life cycle

Each pack includes locking plates and screws

Pitch: 525
Fitting: Narrow Spline
Type: SUPERPINION
Manufacturer: KKBIKE
Number of teeth: 15

for Honda XL 600 V Transalp PD10 1997-2000
Customer reviews

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

DID Chainkit 15/47 525 VX 118 X-Ring Honda XL 600 V Transalp PD10 1997-2000
DID Chainkit 15/47 525 VX 118 X-Ring Honda XL 600 V...
as original gear ratio 15:47 pinion sprocket by JT-Sprocket
DID 525VX-118 X ring with Netschloss

All parts are made ​​of high quality material and conform in quality and workmanship is absolutely the original parts.

for Honda XL 600 V Transalp PD10 1997-2000
129,90 EUR
OIL FILTER HIFLO HF303 : Honda XL 600 V Transalp PD10 97-00 (H7-M7231376-PD10)
OIL FILTER HIFLO HF303 : Honda XL 600 V Transalp PD10...
The pressure valve opens at 0.90 bar.

Hiflo Premium Oil Filter

The premium oil filters from Hiflo offer the most value for the customer and convince through best quality.
Only high quality materials are used exclusively for the production of the filters.

As the only filter manufacturer can Hilfo its filters tested and certified by TÜV South Germany.
The filters are compared in all relevant criteria with the respective original filter.
The test can be passed only be successful if the filter Hiflo of the values ​​of the original filter meets or exceeds.

This ensures that all filters meet the quality standards of the original equipment.
The guarantee of the motorcycle remains, according to TÜV South Germany, obtained with the use of a replacement filter,
if a similar or higher-quality filter is used.

Hiflo also offers the largest range of filters for motorcycles and ATV.

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
8,70 EUR
SPEEDOMETER CABLE . : Honda XL 600 V Transalp PD10 97-00 (H7-M7316060-PD10)
SPEEDOMETER CABLE . : Honda XL 600 V Transalp PD10...
Our trains and shafts are predominantly made in Europe
Smooth running is enhanced by special oils, greases or coatings. For the trains is usually a high-quality silicone oil used to reduce the hand forces. This oil lubricates permanently and does not dry out. The waves slide in a long-lasting calcium grease.

To increase our ability to deliver and lower your inventory,
we have a merger for speedometer and tachometer shafts
certain lengths in increments of max. 4.5 cm performed. The
means that some waves are up to 4.5 cm longer than the original wave.
Your advantage: With just a few waves you cover the entire program.

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
8,50 EUR
Chain guard Honda XL 600 V Transalp PD10 1997-2000
Chain guard Honda XL 600 V Transalp PD10 1997-2000
NEW PART original Honda
Chain guard slider
Honda Partnumber: 52181-MM9-000

for Honda XL 600 V Transalp PD10 1997-2000
29,90 EUR
SPROCKET NUT JMP by PROBOLT M10X1.25MM Alu Drilled Black : Honda XL 600 V Transalp PD10 97-00 (H7-M7759097-PD10)
SPROCKET NUT JMP by PROBOLT M10X1.25MM Alu Drilled...
Sprocket Nut Pro Bolt

Drilling the Race Spec nuts allows additional use of fuse wire.

Made of high-strength aluminum aircraft. - colored anodised
Up to 60% lighter than steel.
The thread of the nut is made of DTD734 stainless steel.

Attention: A torque of max. 44 Nm is recommended!

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
4,90 EUR
SILICON RECTIFIER HONDA : Honda XL 600 V Transalp PD10 97-00 (H7-M7054661-PD10)
SILICON RECTIFIER HONDA : Honda XL 600 V Transalp PD10...
Rectifier Tourmax

Made in Japan

High quality spare part in original quality. Form and function correspond to the original part.

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
9,50 EUR
THROTTLE CABLE A A / OPEN : Honda XL 600 V Transalp PD10 97-00 (H7-M7150816-PD10)
THROTTLE CABLE A A / OPEN : Honda XL 600 V Transalp...
Our trains and shafts are predominantly made in Europe
Smooth running is enhanced by special oils, greases or coatings. For the trains is usually a high-quality silicone oil used to reduce the hand forces. This oil lubricates permanently and does not dry out. The waves slide in a long-lasting calcium grease.

To increase our ability to deliver and lower your inventory,
we have a merger for speedometer and tachometer shafts
certain lengths in increments of max. 4.5 cm performed. The
means that some waves are up to 4.5 cm longer than the original wave.
Your advantage: With just a few waves you cover the entire program.

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
10,90 EUR
REAR SPROCKET 47 TOOTH PITCH 525 INNER DIAMETER 130 BOLT SPACING 150 : Honda XL 600 V Transalp PD10 97-00 (H7-M7274319-PD10)
REAR SPROCKET 47 TOOTH PITCH 525 INNER DIAMETER 130...
The JT Sprockets production is now the largest and most modern production facility for pinions and chain wheels worldwide,
equipped with the latest generation of CNC manufacturing machines.
JT Sprockets produces the entire program of pinions and chain wheels for the aftermarket and the original equipment.

Each pinion and sprocket passes through 25 production stages and is subjected to more than ten individual quality tests in order to successfully leave production.

JT Sprockets manufactures in the right way: by turning, milling and drilling! This is the only way to achieve the highest quality with the lowest tolerances and the best profile of the teeth.
After the subsequent heat remuneration, each article is tested by hand - so JT Sprockets sets new quality standards in the motorcycle industry.

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
28,50 EUR
THROTTLE CABLE B B / CLOSE : Honda XL 600 V Transalp PD10 97-00 (H7-M7318033-PD10)
THROTTLE CABLE B B / CLOSE : Honda XL 600 V Transalp...
Our trains and shafts are predominantly made in Europe
Smooth running is enhanced by special oils, greases or coatings. For the trains is usually a high-quality silicone oil used to reduce the hand forces. This oil lubricates permanently and does not dry out. The waves slide in a long-lasting calcium grease.

To increase our ability to deliver and lower your inventory,
we have a merger for speedometer and tachometer shafts
certain lengths in increments of max. 4.5 cm performed. The
means that some waves are up to 4.5 cm longer than the original wave.
Your advantage: With just a few waves you cover the entire program.

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
10,90 EUR
CLUTCH CABLE. : Honda XL 600 V Transalp PD10 97-00 (H7-M7319015-PD10)
CLUTCH CABLE. : Honda XL 600 V Transalp PD10 97-00...
Our trains and shafts are predominantly made in Europe
Smooth running is enhanced by special oils, greases or coatings. For the trains is usually a high-quality silicone oil used to reduce the hand forces. This oil lubricates permanently and does not dry out. The waves slide in a long-lasting calcium grease.

To increase our ability to deliver and lower your inventory,
we have a merger for speedometer and tachometer shafts
certain lengths in increments of max. 4.5 cm performed. The
means that some waves are up to 4.5 cm longer than the original wave.
Your advantage: With just a few waves you cover the entire program.

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
15,90 EUR
Forkboot set XL Honda XL 600 V Transalp PD10 1997-2000
Forkboot set XL Honda XL 600 V Transalp PD10 1997-2000...
NEW PART original Honda
Forkboot set
Content: 2 pieces forkboots Honda part number: 51611-MM9-013ZE


Still looking for other original spare parts? Send us the requested part number, we will send you an offer.
Original spare parts from Honda, Suzuki, Kawasaki, Yamaha

for Honda XL 600 V Transalp PD10 1997-2000
99,80 EUR
Chain guard set Honda XL 600 V Transalp PD10 1997-2000
Chain guard set Honda XL 600 V Transalp PD10 1997-2000...
NEW PART original Honda
Chain guard set small and large
Honda Partnumber: 52181-MM9-000 and
Honda Partnumber: 52170-MM9-000

for Honda XL 600 V Transalp PD10 1997-2000
53,90 EUR
Thermostat sealing ring Honda XL 600 V Transalp PD10 1997-1999
Thermostat sealing ring Honda XL 600 V Transalp PD10...
NEW original Honda spare parts
Thermostat sealing ring
Honda part number: 91311-KE8-000

for Honda XL 600 V Transalp PD10 1997-1999
4,20 EUR
HEADSTOCK BEARING KIT ALL BALLS RACING front : Honda XL 600 V Transalp PD10 97-00 (H7-M7360044-PD10)
HEADSTOCK BEARING KIT ALL BALLS RACING front : Honda...
All Balls Racing taper roller bearing set for steering head

- contains all bearings and seals required for assembly
- high-quality OE replacement for ball bearings or direct replacement for taper bearings
- specially manufactured sealing lips, which protect against dirt and water, as well as the
Keep the bearing grease clean

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 front
43,90 EUR
MASTER CYLINDER REPAIR KIT ALL BALLS RACING front : Honda XL 600 V Transalp PD10 97-00 (H7-M7170063-PD10)
MASTER CYLINDER REPAIR KIT ALL BALLS RACING front...
Main brake cylinder repair kit from All Balls Racing


Contains all necessary parts to repair the main brake cylinder.


Content:
2 cuffs
2 sealing rings
1 bellows
1 spring
2 screws
1 Sprengring

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 front
23,80 EUR
CUSH DRIVE SET 6-PIECE SET rear : Honda XL 600 V Transalp PD10 97-00 (H7-M7275571-PD10)
CUSH DRIVE SET 6-PIECE SET rear : Honda XL 600 V Transalp...
Drive shock absorber set Tourmax

Made in Japan

- serve to dampen the load change in the drive train
- worn shock absorbers are noticeable by increased play in the drive train and then lead to wear of the chain set

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 rear
25,70 EUR
Gasket Valve cover 6 pcs set Honda XL 600 V Transalp PD10 1997-2000
Gasket Valve cover 6 pcs set Honda XL 600 V Transalp...
NEW PART
Set within:
2 Pcs. Athena Gasket Valve cover
original Honda:
2 Pcs. O-Ring 44x3 Honda Nr.: 91303-MF5-003
2 Pcs. O-Ring 62,4x2,5 Honda Nr. 91304-MF5-003

for Honda XL 600 V Transalp PD10 1997-2000
49,90 EUR
WATER PUMP GASKET : Honda XL 600 V Transalp PD10 97-00 (H7-M7342205-PD10)
WATER PUMP GASKET : Honda XL 600 V Transalp PD10 97-00...
Water pump seal Tourmax

Made in Japan

High quality spare part in original quality. Form and function correspond to the original part.

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
4,50 EUR
EXHAUST GASKET 35.1X42.7X4MM : Honda XL 600 V Transalp PD10 97-00 (H7-M7342429-PD10)
EXHAUST GASKET 35.1X42.7X4MM : Honda XL 600 V Transalp...
Gaskets by Athena - Made in Italy

Athena is original equipment leading Italian motorcycle manufacturer. The seals are manufactured to European quality standard ISO 9000 and are thus under constant quality control. Consistent quality is guaranteed. High-quality materials, and Reinz and Elring sealing paper speak for themselves.

To keep your storage capacity small, Athena covers for sealing sets with additional seals several model years of your seal
Program from.

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
5,90 EUR
DICHT EXHAUST VERBIND (ORIG SPARE PART) : Honda XL 600 V Transalp PD10 97-00 (H7-M7344007-PD10)
DICHT EXHAUST VERBIND (ORIG SPARE PART) : Honda XL...
Exhaust connection seal

Original spare parts

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
21,90 EUR