BRAKE CALIPER REPAIR KIT : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7171465-RD03)

NEW original Honda spare parts
Brake hose guide rear
Honda part number: 43468-KS6-700

for Honda XRV 650 RD03 Africa Twin 1988-1989

Master Cylinder Repair Kit Tourmax

Made in Japan

Contains all parts needed to repair the master cylinder.

Price Unit: 1 Set

for Honda XRV 650 Africa Twin RD03 1988-1990 rear

EBC MX brake disc for offroad motorcycles. MADE IN UK.

The aim of the development is to improve the braking behavior compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is significantly more resistant to rust than cast steel. In addition, the entire surface is protected by a 3 micron thick zinc layer, which is already abraded in the area of ​​the brake lining contact zone when braking. It is only in this area that it is easier to form rust rust with a longer service life.

The brake discs are drilled in the bird's swing signal to get rid of the rainwater and brake dust with as few holes as possible while simultaneously cleaning the brake disc. The less drill holes are installed, the better the wet braking behavior and the lower the wear.

- Rigid brake disc.
- Made from heat-treated carbon steel.
- Braked surface with optimized hole pattern.
- Radially ground.
- Galvanized for protection against corrosion.
- EBC recommends EBC Organic TT brake pads or for sporty drivers EBC sintered brake blocks in R or MXS mixture.
- Stand-alone design.
- The thickness of the brake disc may vary from the original part.

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990 rear

EBC MX brake disc for offroad motorcycles. MADE IN UK.

The aim of the development is to improve the braking behavior compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is significantly more resistant to rust than cast steel. In addition, the entire surface is protected by a 3 micron thick zinc layer, which is braked in the area of ​​the brake lining contact zone when braking. It is only in this area that it is easier to form rust rust with a longer service life.

The brake discs are drilled in the bird's swing signal to get rid of the rainwater and brake dust with as few holes as possible while simultaneously optimizing the brake disc. The fewer drill holes are installed, the better the wet braking behavior and the lower the wear.

- Rigid brake disc.
- Made from heat-treated carbon steel.
- Braked surface with optimized hole pattern.
- Radially ground.
- Galvanized to protect against corrosion.
- EBC recommends EBC Organic TT brake pads or for sporty drivers EBC sintered brake blocks in R or MXS mixture.
- Stand-alone design.
- The thickness of the brake disc may vary from the original part.

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990 front

The pressure valve opens at 0.90 bar.

Hiflo Premium Oil Filter

The premium oil filters from Hiflo offer the most value for the customer and convince through best quality.
Only high quality materials are used exclusively for the production of the filters.

As the only filter manufacturer can Hilfo its filters tested and certified by TÜV South Germany.
The filters are compared in all relevant criteria with the respective original filter.
The test can be passed only be successful if the filter Hiflo of the values ​​of the original filter meets or exceeds.

This ensures that all filters meet the quality standards of the original equipment.
The guarantee of the motorcycle remains, according to TÜV South Germany, obtained with the use of a replacement filter,
if a similar or higher-quality filter is used.

Hiflo also offers the largest range of filters for motorcycles and ATV.

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990