Nute cowl set 4 pcs. Honda XRV 650 RD03 Africa Twin 1988-1989

NEW original Honda spare parts
Brake hose guide rear
Honda part number: 43468-KS6-700

for Honda XRV 650 RD03 Africa Twin 1988-1989

EBC MX brake disc for offroad motorcycles. MADE IN UK.

The aim of the development is to improve the braking behavior compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is significantly more resistant to rust than cast steel. In addition, the entire surface is protected by a 3 micron thick zinc layer, which is already abraded in the area of ​​the brake lining contact zone when braking. It is only in this area that it is easier to form rust rust with a longer service life.

The brake discs are drilled in the bird's swing signal to get rid of the rainwater and brake dust with as few holes as possible while simultaneously cleaning the brake disc. The less drill holes are installed, the better the wet braking behavior and the lower the wear.

- Rigid brake disc.
- Made from heat-treated carbon steel.
- Braked surface with optimized hole pattern.
- Radially ground.
- Galvanized for protection against corrosion.
- EBC recommends EBC Organic TT brake pads or for sporty drivers EBC sintered brake blocks in R or MXS mixture.
- Stand-alone design.
- The thickness of the brake disc may vary from the original part.

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990 rear

EBC MX brake disc for offroad motorcycles. MADE IN UK.

The aim of the development is to improve the braking behavior compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is significantly more resistant to rust than cast steel. In addition, the entire surface is protected by a 3 micron thick zinc layer, which is braked in the area of ​​the brake lining contact zone when braking. It is only in this area that it is easier to form rust rust with a longer service life.

The brake discs are drilled in the bird's swing signal to get rid of the rainwater and brake dust with as few holes as possible while simultaneously optimizing the brake disc. The fewer drill holes are installed, the better the wet braking behavior and the lower the wear.

- Rigid brake disc.
- Made from heat-treated carbon steel.
- Braked surface with optimized hole pattern.
- Radially ground.
- Galvanized to protect against corrosion.
- EBC recommends EBC Organic TT brake pads or for sporty drivers EBC sintered brake blocks in R or MXS mixture.
- Stand-alone design.
- The thickness of the brake disc may vary from the original part.

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990 front

Clutch cover gasket Athena

Athena, an international company founded in 1973, develops and manufactures seals, technical spare parts and metal components for the industrial and motorcycle sector according to the highest quality standards UNI EN ISO 9001, 9002, 14001 and UNI ISO / TS 16949.

Athena is the reference point in the market for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs and Harley Davidson.

In the off-road world, the Athena pool of engineers and technicians is developing new product lines in collaboration with key international teams from MXGP and AMA Supercross.

Athena products undergo rigorous quality testing to ensure customers high standards of performance, competitiveness and reliability.

Athena offers the widest range of replacement seals available on the market, with more than 40 years of industry experience. Athena Sealing Kits are based on in-depth know-how, continuous technological development achieved by our in-house team of engineers and designers, and production geared strictly to the parameters required by OEMs.

Athena offers a range of seals with excellent sealing properties, available in sheets of paper, cellulose, metal and rubber and in various thicknesses to meet customer requirements.

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990

JMP plastic mirror without E-mark

Attention: The original mirror could be bolted to a mirror rod M8 left-hand thread with a rubber adapter M10 right-hand thread in vehicle bore.

- black
- Head round Ø 110 mm
- Rod 10 mm
- Thread 10 mm right
- downsizing

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990

Our trains and shafts are predominantly made in Europe
Smooth running is enhanced by special oils, greases or coatings. For the trains is usually a high-quality silicone oil used to reduce the hand forces. This oil lubricates permanently and does not dry out. The waves slide in a long-lasting calcium grease.

To increase our ability to deliver and lower your inventory,
we have a merger for speedometer and tachometer shafts
certain lengths in increments of max. 4.5 cm performed. The
means that some waves are up to 4.5 cm longer than the original wave.
Your advantage: With just a few waves you cover the entire program.

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990