XL 600 V Transalp PD10

XL 600 V Transalp PD10
Brand: Honda
Name: Transalp
Model: XL 600 V
Type: PD10
Year of prod.: 1997 - 2000
Capacity: 600
Transmission front - rear / chain: 15 – 47 / 118
 
DID Chainkit 15/47 525 VX 118 X-Ring Honda XL 600 V Transalp PD10 1997-2000
as original gear ratio 15:47 pinion sprocket by JT-Sprocket
DID 525VX-118 X ring with Netschloss

All parts are made ​​of high quality material and conform in quality and workmanship is absolutely the original parts.

for Honda XL 600 V Transalp PD10 1997-2000
129,90 EUR
incl. 20% tax excl. Shipping costs
DISC LOCK REMINDER JMP : Honda XL 600 V Transalp PD10 97-00 (H7-M7134794-PD10)
JMP memory cable for brake disc locks

The spiral cable is attached to the lock and handlebars.
A favorable investment to avoid expensive damage caused by disc locks.

Measurements: 4mm diameter, 1530mm length
Color: neon yellow

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
11,90 EUR
incl. 20% tax excl. Shipping costs
EBC Brake disc front set 2 pieces Honda XL 600 V Transalp PD10 1997-2000
2 pieces EBC brake discs. MADE IN UK.
Goal of the development is the improvement in braking performance compared to the original brake disc. EBC used HPSR steel with a low carbon content. This steel is much more resistant to rust than cast steel.
Rigid disc. Made from heat-treated carbon steel. Drilled braking surface with optimized hole pattern. Radial honed. Galvanized for protection against corrosion. Independent design. Thickness of the brake disc may differ from the original part.

for Honda XL 600 V Transalp PD10 1997-2000
175,90 EUR
incl. 20% tax excl. Shipping costs
EBC Brake pads front 2 sets Honda XL 600 V Transalp PD10 1997-2000
2 sets EBC brake pads TT carbon graphite mixture
TT brake pads from EBC in the new carbon-graphite mixture were specially developed for use in dirt bikes and ATVs. They develop when braking very low temperatures, despite a high coefficient of friction. Powerful brake performance and low wear similar to that of sintered pads characterize the TT brake pads under almost all conditions.

for Honda XL 600 V Transalp PD10 1997-2000
35,90 EUR
incl. 20% tax excl. Shipping costs
Engine cam chain tensioner 14510-MR1-000 Honda XL 600 V Transalp PD10 1997-2000
NEW original Honda spare parts
Engine cam chain tensioner 14510-MR1-000
Honda part number: 14510-MR1-000

for Honda XL 600 V Transalp PD10 1997-2000
104,40 EUR
incl. 20% tax excl. Shipping costs
Engine housing dowel pin 8x14 Honda XL 600 V Transalp PD10 1997-1999
NEW original Honda spare parts
Engine housing dowel pin 8x14
Honda part number: 94301-08140

for Honda XL 600 V Transalp PD10 1997-1999
1,70 EUR
incl. 20% tax excl. Shipping costs
Enginecover screw seal Honda XL 600 V Transalp PD10 1997-2000
NEW PART original Honda
Enginecover screw seal
Honda part number:
1 pcs. 91356-425-005
1 pcs. 90087-KT7-000

That's not the part you're looking for? Send us the requested part number, we will forward you an offer.
Original spare parts from Honda, Suzuki, Kawasaki, Yamaha

for Honda XL 600 V Transalp PD10 1997-2000
19,90 EUR
incl. 20% tax excl. Shipping costs
EXHAUST GASKET 35.1X42.7X4MM : Honda XL 600 V Transalp PD10 97-00 (H7-M7342429-PD10)
Gaskets by Athena - Made in Italy

Athena is original equipment leading Italian motorcycle manufacturer. The seals are manufactured to European quality standard ISO 9000 and are thus under constant quality control. Consistent quality is guaranteed. High-quality materials, and Reinz and Elring sealing paper speak for themselves.

To keep your storage capacity small, Athena covers for sealing sets with additional seals several model years of your seal
Program from.

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
5,90 EUR
incl. 20% tax excl. Shipping costs
EXHAUST PLUG BLACK 23/52MM 4 STROKE : Honda XL 600 V Transalp PD10 97-00 (H7-M7226061-PD10)
JMP exhaust plugs with handle

Prevents the penetration of dirt and water during washing, eg when cleaning with high-pressure cleaners
For 4 stroke motorcycles

Length without handle: 60 mm
Diameter, bottom: 23 mm
Diameter, top: 52 mm

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000
6,40 EUR
incl. 20% tax excl. Shipping costs
Fairing sleeve Honda XL 600 V Transalp PD10 1997-1999
NEW original Honda spare parts
Fairing sleeve
Honda part number: 52159-KB7-000

for Honda XL 600 V Transalp PD10 1997-1999
5,60 EUR
incl. 20% tax excl. Shipping costs
Fender screw on top Honda XL 600 V Transalp PD10 1997-1999
NEW original Honda spare parts
Fender screw on top
Honda part number: 90106-MN9-000

for Honda XL 600 V Transalp PD10 1997-1999
2,90 EUR
incl. 20% tax excl. Shipping costs
FLOAT NEEDLE COMPLETE ASSEMBLY WITH SEAT : Honda XL 600 V Transalp PD10 97-00 (H7-M7240595-PD10)
Swimmer needle with seat complete Tourmax

Made in Japan

High quality spare part in original quality. Form and function correspond to the original part.

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000
9,40 EUR
incl. 20% tax excl. Shipping costs
Footrest front pin 50603-033-010 Honda XL 600 V Transalp PD10 1997-2000
NEW original Honda spare parts
Footrest front pin 50603-033-010
Honda part number: 50603-033-010

for Honda XL 600 V Transalp PD10 1997-2000
3,80 EUR
incl. 20% tax excl. Shipping costs
Footrest front right 50616-MM9-000 Honda XL 600 V Transalp PD10 1997-2000
SOLD OUT
NEW original Honda spare parts
Footrest front right 50616-MM9-000
Honda part number: 50616-MM9-000

for Honda XL 600 V Transalp PD10 1997-2000
24,90 EUR
incl. 20% tax excl. Shipping costs
FOOTREST RUBBERS : Honda XL 600 V Transalp PD10 97-00 (H7-M7102437-PD10)
SOLD OUT
Footpeg rubbers Tourmax

Made in Japan

High quality spare part in original quality. Form and function correspond to the original part.

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000
18,90 EUR
incl. 20% tax excl. Shipping costs
FORK DUST CAP SET 41x54.4x12.5 ALL BALLS RACING front : Honda XL 600 V Transalp PD10 97-00 (H7-M7350209-PD10)
Dust Caps from All Balls Racing

- Reduced friction from the special grease coating.

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 front
19,90 EUR
incl. 20% tax excl. Shipping costs
FORK OIL SEAL KIT - ARI 41X54X11 front : Honda XL 600 V Transalp PD10 97-00 (H7-M7340067-PD10)
SOLD OUT
ARI fork seal kit

The quality of their product is formed by the unique nature of the material used (XNBR).

This fork seal offers unique properties and can used in modern forks of motorcycles and scooters.

The seals have a high resistance to abrasion and high temperatures.

ARI fork seals correspond both in quality as well as the dimension of OE seals.
This results in the best possible seal in all road and weather conditions.
This fork seal can be used both on and off the track.

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 front
10,90 EUR
incl. 20% tax excl. Shipping costs
FORK OIL SEAL KIT - ATHENA 41X54X11 front : Honda XL 600 V Transalp PD10 97-00 (H7-M7346406-PD10)
Athena Fork seal set

- Dimensions: 41X54X11 mm

- Same extent as 779 37 63, other rubber mixture


Ducati Monster 900 Showa fork

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 front
8,90 EUR
incl. 20% tax excl. Shipping costs
FORK OIL SEAL KIT 41X54X11  - ALL BALLS front : Honda XL 600 V Transalp PD10 97-00 (H7-M7350079-PD10)
Simmerring set without dust caps from All Balls Racing

- better breakaway torque and up to 3x less friction than OE Simmerrings
- Patented Max-Life production, which increases the life by 3-4 times
- Simmer rings are sealed 3-way

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 front
18,80 EUR
incl. 20% tax excl. Shipping costs
FORK OIL SEAL KIT 41X54X11 WITH DUST CAP  - ALL BALLS front : Honda XL 600 V Transalp PD10 97-00 (H7-M7350027-PD10)
Simmerring set with dust caps from All Balls Racing

- better breakaway torque and up to 3x less friction than OE Simmerrings
- Patented Max-Life production, which increases the life time by 3-4 times
- Simmer rings are sealed 3-way
- Dust caps are coated with a special grease for the response
to improve

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 front
39,90 EUR
incl. 20% tax excl. Shipping costs
FORK OIL SEAL KIT 41X54X11 WITH DUST CAP front : Honda XL 600 V Transalp PD10 97-00 (H7-M7357015-PD10)
Fork seal set with dust cap Tourmax

Made in Japan

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 front
22,60 EUR
incl. 20% tax excl. Shipping costs
Fork seal collectors 26-45mm
Fork seal collectors - Combination tool suitable for all fork tubes with a diameter of 26.0 mm - 45.0 mm

 
63,50 EUR
incl. 20% tax excl. Shipping costs
FORK SPRINGS front : Honda XL 600 V Transalp PD10 97-00 (H7-M7430986-PD10)
Fork springs from Wirth
Progressively wrapped fork springs for improved driving behavior

- chassis improvement, progressive fork springs harder than the original!
- No more punishment
- fewer brems, no sponges.
- Air support falls away
- no more blowing of the simmering
- better response
- Ideal replacement for slack original springs with high running performance
- Tested and recommended by leading motorcycle magazines
- Light construction with detailed instructions

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 front
134,90 EUR
incl. 20% tax excl. Shipping costs
Forkboot band set XL Honda XL 600 V Transalp PD10 1997-2000
NEW PART original Honda
Forkboot band set
Content:
1 piece Forkboot band Honda part number: 51612-KF0-003
1 piece Forkboot Honda part number 51611-MM9-013ZE


Still looking for other original spare parts? Send us the requested part number, we will send you an offer.
Original spare parts from Honda, Suzuki, Kawasaki, Yamaha

for Honda XL 600 V Transalp PD10 1997-2000
58,90 EUR
incl. 20% tax excl. Shipping costs
121 to 150 (from a total of 439)