XRV 750 RD04 Africa Twin

XRV 750 RD04 Africa Twin
Brand: Honda
Name: Africa Twin
Model: XRV 750
Type: RD04
Year of prod.: 1990 - 1992
Capacity: 750
Equipment:
Transmission front - rear / chain: 16 – 46 / 124
 
BRAKE CALIPER SEAL KIT JMPID 7171416
SOLD OUT
BRAKE CALIPER SEAL KIT JMP front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7170538-RD04)
Brake Caliper Repair Kit JMP

High quality components for a low price

Contains the parts needed to repair the caliper.

Price Unit: 1 Set

for Honda XRV 750 Africa Twin RD04 1990-1992 front
35,50 EUR
incl. 20% tax excl. Shipping costs
Brake Cap 45203-MG3-016 Honda XRV 750 RD04 Africa Twin 1990-1992
Brake Cap 45203-MG3-016 Honda XRV 750 RD04 Africa Twin 1990-1992
NEW original Honda spare parts
Brake Cap 45203-MG3-016
Honda part number: 45203-MG3-016

for Honda XRV 750 RD04 Africa Twin 1990-1992
4,20 EUR
incl. 20% tax excl. Shipping costs
BRAKE DISC BOLTM8X22
BRAKE DISC BOLTM8X22 front rear : Honda XRV 750 Africa Twin RD04 90-92 (M7-H7170205-RD04)


Disc screw

- OE replacement part

- M8x1,25x22

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992 front rear
4,90 EUR
incl. 20% tax excl. Shipping costs
BRAKE DISC EBC GALVANISED STEEL front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7604218-RD04)
BRAKE DISC EBC GALVANISED STEEL front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7604218-RD04)
Brake discs EBC. MADE IN UK.
The aim of the development is to improve the braking performance compared to the original brake disc. EBC uses low carbon HPSR steel, which has an 18% higher coefficient of friction. This steel is much more resistant to rust than cast steel. In addition, the entire surface is protected by a 3 micron thick zinc layer, which abrades itself in the area of ​​the brake pad contact zone during braking. Only in this area can more easily rust form during prolonged life.

The brake discs are drilled in Vogelschwingendesign to get along with as few holes as possible while optimizing cleaning of the brake disc of rainwater and brake dust. The fewer holes are fitted, the better the wet braking performance and the lower the wear.

- Rigid brake disc.
- Made from rolled low carbon HPSR steel.
- Drilled brake surface with optimized hole pattern.
- Radially ground.
- Galvanized for protection against corrosion.
- EBC recommends EBC Organic Brake Pads or for sporty drivers EBC Double-H Sintered Brake Pads.
- Independent design.

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992 front
89,80 EUR
incl. 20% tax excl. Shipping costs
BRAKE DISC EBC MX/ENDURO/ATV rear : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7604101-RD04)
BRAKE DISC EBC MX/ENDURO/ATV rear : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7604101-RD04)
EBC MX brake disc for offroad motorcycles. MADE IN UK.

The aim of the development is to improve the braking behavior compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is significantly more resistant to rust than cast steel. In addition, the entire surface is protected by a 3 micron thick zinc layer, which is already abraded in the area of ​​the brake lining contact zone when braking. It is only in this area that it is easier to form rust rust with a longer service life.

The brake discs are drilled in the bird's swing signal to get rid of the rainwater and brake dust with as few holes as possible while simultaneously cleaning the brake disc. The less drill holes are installed, the better the wet braking behavior and the lower the wear.

- Rigid brake disc.
- Made from heat-treated carbon steel.
- Braked surface with optimized hole pattern.
- Radially ground.
- Galvanized for protection against corrosion.
- EBC recommends EBC Organic TT brake pads or for sporty drivers EBC sintered brake blocks in R or MXS mixture.
- Stand-alone design.
- The thickness of the brake disc may vary from the original part.

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992 rear
86,90 EUR
incl. 20% tax excl. Shipping costs
BRAKE DISC LOCK YELLOW 6 mm mit Alarmfunktion Urban : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7130514-RD04)
SOLD OUT
BRAKE DISC LOCK YELLOW 6 mm mit Alarmfunktion Urban : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7130514-RD04)
Brake disc lock Urban

- with 120 dba loud alarm + glow signal
- 6mm bolts of hardened steel
- Activation button. Can therefore be transported closed
- Motion and vibration sensor

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992
59,50 EUR
incl. 20% tax excl. Shipping costs
BRAKE DISC TRW LUCASRIGID
BRAKE DISC TRW LUCAS RIGID front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7880065-RD04)
All brake discs have an ABE, also for scooters.

The washers are low-wear and have an up to 30% longer service life compared to some comparable spare parts.

All variants: Allround, RAC and EC-offroad discs, consist of extremely dimensionally stable and hardened steel.

The precise surface grinding (thickness deviation of 2 / 100mm) avoids vibrations and improves the adaptation of the linings.

A uniform temperature rise and fall allows for a constant pressure point.


A new special alloy prevents excessive corrosion.
Laser technology allows a light construction with fine contours.

Each brake disc can be individually driven with brake linings from the TRW-Lucas range.
TRW-Lucas floating brake disc Allround

- Round outer contour with perforated braking edge
- In rigid and floating versions
- Matched design from front to rear axle

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992 front
97,50 EUR
incl. 20% tax excl. Shipping costs
BRAKE DISC TRW LUCASRIGID
SOLD OUT
BRAKE DISC TRW LUCAS RIGID rear : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7880909-RD04)
All brake discs have an ABE, also for scooters.

The washers are low-wear and have an up to 30% longer service life compared to some comparable spare parts.

All variants: Allround, RAC and EC-offroad discs, consist of extremely dimensionally stable and hardened steel.

The precise surface grinding (thickness deviation of 2 / 100mm) avoids vibrations and improves the adaptation of the linings.

A uniform temperature rise and fall allows for a constant pressure point.


A new special alloy prevents excessive corrosion.
Laser technology allows a light construction with fine contours.

Each brake disc can be individually driven with brake linings from the TRW-Lucas range.
TRW-Lucas floating brake disc Allround

- Round outer contour with perforated braking edge
- In rigid and floating versions
- Matched design from front to rear axle

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992 rear
98,50 EUR
incl. 20% tax excl. Shipping costs
Brake disk screw Honda XRV 750 RD04 Africa Twin 1990-1992
Brake disk screw Honda XRV 750 RD04 Africa Twin 1990-1992
NEW PART original Honda
Brake disk screw
Honda Partnumber: 90105-MK5-010

for Honda XRV 750 RD04 Africa Twin 1990-1992
3,90 EUR
incl. 20% tax excl. Shipping costs
Brake disk screw set Honda XRV 750 RD04 Africa Twin 1990-1992
Brake disk screw set Honda XRV 750 RD04 Africa Twin 1990-1992
NEW PART original Honda
Brake disk screw set 4 pcs.
Honda Partnumber: 90105-MK5-010

for Honda XRV 750 RD04 Africa Twin 1990-1992
14,90 EUR
incl. 20% tax excl. Shipping costs
Brake hinten MY1 Honda XRV 750 RD04 Africa Twin 1990-1992
Brake hinten MY1 Honda XRV 750 RD04 Africa Twin 1990-1992
NEW PART original Honda
Brake lever rear MY1
Honda part number: 46510-MY1-000


Still looking for other original spare parts? Send us the requested part number, we will send you an offer.
Original spare parts from Honda, Suzuki, Kawas
79,50 EUR
incl. 20% tax excl. Shipping costs
Brake holder guide 45111-MA3-006 Honda XRV 750 RD04 Africa Twin 1990-1992
Brake holder guide 45111-MA3-006 Honda XRV 750 RD04 Africa Twin 1990-1992
NEW original Honda spare parts
Brake guide 45111-MA3-006
Honda part number: 45111-MA3-006

for Honda XRV 750 RD04 Africa Twin 1990-1992
11,90 EUR
incl. 20% tax excl. Shipping costs
Brake holder rubber 43132-KT7-761 Honda XRV 750 RD04 Africa Twin 1990-1992
Brake holder rubber 43132-KT7-761 Honda XRV 750 RD04 Africa Twin 1990-1992
NEW original Honda spare parts
Brake holder rubber 43132-KT7-761
Honda part number: 43132-KT7-761

for Honda XRV 750 RD04 Africa Twin 1990-1992
6,80 EUR
incl. 20% tax excl. Shipping costs
Brake Holder Screw 8x49 90180-MN8-006 Honda XRV 750 RD04 Africa Twin 1990-1992
Brake Holder Screw 8x49 90180-MN8-006 Honda XRV 750 RD04 Africa Twin 1990-1992
NEW original Honda spare parts
Brake Holder Screw rear 8x49 90180-MN8-006
Honda part number: 90180-MN8-006

for Honda XRV 750 RD04 Africa Twin 1990-1992
4,20 EUR
incl. 20% tax excl. Shipping costs
Brake hose guide rear Honda XRV 750 RD04 Africa Twin 1990-1992
Brake hose guide rear Honda XRV 750 RD04 Africa Twin 1990-1992
NEW original Honda spare parts
Brake hose guide rear
Honda part number: 43468-KS6-700

for Honda XRV 750 RD04 Africa Twin 1990-1992
11,50 EUR
incl. 20% tax excl. Shipping costs
BRAKE HOSE HOLDER JMP by PRO BOLT6MM ALU SILVER
BRAKE HOSE HOLDER JMP by PRO BOLT 6MM ALU SILVER front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7758415-RD04)
Holder for brake hose JMP powered by Pro Bolt

Made from high strength aircraft aluminum. - Anodised
60% lighter than stainless steel.

Package Contents: 1 piece

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992 front
5,80 EUR
incl. 20% tax excl. Shipping costs
BRAKE LEVER BLACK FORGED JMP : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7300542-RD04)
BRAKE LEVER BLACK FORGED JMP : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7300542-RD04)
JMP lever forged


Drop forged JMP levers are made of high quality aluminum alloy 6061-T6.
The high material density makes the levers more elastic and thus more resistant to breakage than conventional replacement levers, which are produced by injection molding.

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992
28,90 EUR
incl. 20% tax excl. Shipping costs
BRAKE LEVERBLACK JMP
BRAKE LEVERBLACK JMP : Honda XRV 750 Africa Twin RD04 90-92 (M7-H7309743-RD04)


Poured JMP lever

Molded lever of JMP correspond in form and function to the original part.
They offer a very good value for money and clean processing.

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992
10,50 EUR
incl. 20% tax excl. Shipping costs
BRAKE LIGHT SWITCH JMP
BRAKE LIGHT SWITCH JMP front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7059769-RD04)
JMP brake light switch

The brake light switches of JMP correspond in shape and function to the original part.

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992 front
10,50 EUR
incl. 20% tax excl. Shipping costs
Brake Pad Spring Honda XRV 750 RD04 Africa Twin 1990-1992
Brake Pad Spring Honda XRV 750 RD04 Africa Twin 1990-1992
NEW original Honda spare parts
Brake Pad Spring
Honda part number: 43112-KT7-761

for Honda XRV 750 RD04 Africa Twin 1990-1992
11,90 EUR
incl. 20% tax excl. Shipping costs
BRAKE PADS REAR SINTERED SH TRWALTN 7329121
BRAKE PADS REAR SINTERED SH TRW rear : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7871668-RD04)
SH coating mixture
Full metal sintering surface with special finish.
High friction coefficient, guarantees very good performance.
Can be used on almost all discs.
Only in exchange for sintered linings in the original equipment.
Only conditionally applicable in racing, since no heat resistance from 400 degrees.
The friction coefficient is adjusted to the SV surface.
Only for rear axle use.

Price Unit: 1 Set

for Honda XRV 750 Africa Twin RD04 1990-1992 rear
30,90 EUR
incl. 20% tax excl. Shipping costs
BRAKE PADS SEMI-SINT V EBC
BRAKE PADS SEMI-SINT V EBC FA140V rear : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7377033-RD04)
EBC Standard Semi-sintered metal brake pads (V series)



The EBC standard semi-sintered metal brake pads (V series) are organic aramide brake pads with 30% copper content for cruisers, big twins and touring bikes.

These pads are 6 times stronger than steel and are also completely asbestos-free.

The medium to high friction coefficient ensures a high braking force over a wide temperature range. The high braking force causes minimal wear on the brake lining and brake disc.

EBC standard semi-sintered metal brake pads (V-series) are TÜV tested and have an ABE!

Price Unit: 1 Set

for Honda XRV 750 Africa Twin RD04 1990-1992 rear
23,50 EUR
incl. 20% tax excl. Shipping costs
BRAKE PADS SINTERED HH EBC FA121HH front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7328594-RD04)
BRAKE PADS SINTERED HH EBC FA121HH front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7328594-RD04)
EBC Brake Pads Double - H

MADE IN USA for motorbikes with original sintered blocks

A quality with the highest braking power, extreme durability and without any

Fading especially for use with heavy and fast machines

Or during street racing.

Best suited for INOX or EBC Pro-Lite brake discs.

Brake pads are also ideal for cast brake discs.

Double - H brake pads are TÜV tested and have an ABE.

Price Unit: 1 Set

for Honda XRV 750 Africa Twin RD04 1990-1992 front
34,20 EUR
incl. 20% tax excl. Shipping costs
BRAKE PADS SINTERED HH EBCALTN 7871668
BRAKE PADS SINTERED HH EBC FA140HH rear : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7329121-RD04)
EBC Brake Pads Double - H

MADE IN USA for motorbikes with original sintered blocks

A quality with the highest braking power, extreme durability and without any

Fading especially for use with heavy and fast machines

Or during street racing.

Best suited for INOX or EBC Pro-Lite brake discs.

Brake pads are also ideal for cast brake discs.

Double - H brake pads are TÜV tested and have an ABE.

Price Unit: 1 Set

for Honda XRV 750 Africa Twin RD04 1990-1992 rear
29,90 EUR
incl. 20% tax excl. Shipping costs
BRAKE PADS SINTERED SV TRWALTN 7328735
BRAKE PADS SINTERED SV TRW front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7873284-RD04)
SV coating mixture
Full metal sintering coating with special finish.
High coefficient of friction guarantees excellent performance.
Can be used on almost all discs.
Only in exchange for sintered linings in the original equipment.
Only conditionally applicable in racing, since no heat resistance from 400 degrees.
Only for front axle use.

Price Unit: 1 Set

for Honda XRV 750 Africa Twin RD04 1990-1992 front
28,20 EUR
incl. 20% tax excl. Shipping costs
BRAKE PADS SINTERED TRW LUCAS SRQ COATING front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7870785-RD04)
SOLD OUT
BRAKE PADS SINTERED TRW LUCAS SRQ COATING front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7870785-RD04)
- SRQ lining mixture
- Full-metal sintered lining
- Only for the racetrack
- Extreme friction, superior effect
- Low hand force, direct response
- Suitable for high performance applications

Price Unit: 1 Set

for Honda XRV 750 Africa Twin RD04 1990-1992 front
25,50 EUR
incl. 20% tax excl. Shipping costs
BRAKE PADS STD EBC FA121 front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7371016-RD04)
BRAKE PADS STD EBC FA121 front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7371016-RD04)
EBC Brake Pads Standard

The EBC version SK930 / SK931 / SK932 / SK933 / SK934 included

Aramid fibers, which are 6 times stronger than steel and completely asbestos-free.

Only low-pollutant components are used in production.

These standard materials exceed all existing EBC standard qualities.

The material mixtures, including the aramid fibers, guarantee a better braking behavior.

High friction stability and very good temperature resistance.

The lifetime is very high, and the disk attack is low.

These qualities retain their excellent properties

Under all weather conditions.

EBC standard brake pads are TÜV tested and have an ABE.

Price Unit: 1 Set

for Honda XRV 750 Africa Twin RD04 1990-1992 front
20,80 EUR
incl. 20% tax excl. Shipping costs
BRAKE PADS STD EBC FA140 rear : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7372360-RD04)
BRAKE PADS STD EBC FA140 rear : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7372360-RD04)
EBC Brake Pads Standard

The EBC version SK930 / SK931 / SK932 / SK933 / SK934 included

Aramid fibers, which are 6 times stronger than steel and completely asbestos-free.

Only low-pollutant components are used in production.

These standard materials exceed all existing EBC standard qualities.

The material mixtures, including the aramid fibers, guarantee a better braking behavior.

High friction stability and very good temperature resistance.

The lifetime is very high, and the disk attack is low.

These qualities retain their excellent properties

Under all weather conditions.

EBC standard brake pads are TÜV tested and have an ABE.

Price Unit: 1 Set

for Honda XRV 750 Africa Twin RD04 1990-1992 rear
20,90 EUR
incl. 20% tax excl. Shipping costs
BRAKE PADS STD TRWALTN 7377484
BRAKE PADS STD TRW front : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7871791-RD04)
Standard flooring
Organic with ceramic undelayer for thermal insulation.
Anti-corrosion finish, long life.
Compatible on all discs.
Solid braking performance, good wet braking behavior.
Suitable for front and rear axle.

Price Unit: 1 Set

for Honda XRV 750 Africa Twin RD04 1990-1992 front
22,90 EUR
incl. 20% tax excl. Shipping costs
BRAKE PADS STD TRWALTN 7372360/7630053
BRAKE PADS STD TRW rear : Honda XRV 750 Africa Twin RD04 90-92 (H7-M7870975-RD04)
Standard flooring
Organic with ceramic underlayer for thermal insulation.
Anti-corrosion finish.
Compatible on all discs.
Tailored to the standard front axle.
Low coefficient of friction prevents rear wheel braking.

Price Unit: 1 Set

for Honda XRV 750 Africa Twin RD04 1990-1992 rear
26,90 EUR
incl. 20% tax excl. Shipping costs
31 to 60 (from a total of 460)