Transmission

Transmission
REAR SPROCKET DUAL 48 TOOTH PITCH 525 GOLD ZF INNER DIAMETER 130 BOLT SPACING 150 : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7580827-RD03)
REAR SPROCKET DUAL 48 TOOTH PITCH 525 GOLD ZF INNER DIAMETER 130 BOLT SPACING 150 : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7580827-RD03)
The ZF dual sprockets are among the highest quality and most technically advanced sprockets in the world.

The secret is based on the combination of the durability of steel and the lightness of duralumin.
This aluminum alloy is characterized by enormous strength and tightness as well as low weight.

The tensile strength is about 11 times that of pure aluminum.
By curing, duralumin almost reaches the strength of steel.
Accordingly, a lower weight and higher resistance has been implemented.

Milling in the tooth base of the sprocket guarantee optimal self-cleaning.
These cuts ensure that the dirt can not get between the teeth and thus wear the chain and the sprocket so fast.

The durability of the ZF-Dual sprockets is about three times longer than pure aluminum sprockets and 50% lighter than steel sprockets.

Ideal for road and offroad use.

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
57,90 EUR
incl. 20% tax excl. Shipping costs
RK X-Ringkette GB525XSO/124
RK X-RING CHAIN GB525XSO/124 OPEN CHAIN WITH RIVET LINK : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7940157-RD03)
RK is the leading manufacturer of drive chains for motorcycles in Japan.

For more than 40 years, RK has been supplying all major Japanese motorcycle manufacturers with original equipment.
Even in racing, RK is the first choice of many teams in the MotoGP, the motocross or the Paris-Dakar Rally.

RK XSO:

This is an improved form of the O-ring chains. Due to the special shape of the X-rings, the chain is sealed at four sealing points, the lubricant can not escape.
In addition, the X-ring serves as an additional lubricant reservoir. The life of the chain is extended by about 30%. This technique has been further developed into the XW ring chain at RK.

- X-ring chain
- four sealing points
- Lubricant can not escape
- The service life is extended by 30% compared to the O-ring chain
- Further development of the X-rings are the XW-rings

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
105,00 EUR
incl. 20% tax excl. Shipping costs
RK X-Ringkette 525XSO/124
RK X-Ringkette 525XSO/124 : Honda XRV 650 Africa Twin RD03 88-90 (M7-H7940087-RD03)
RK is the leading manufacturer of drive chains for motorcycles in Japan.

For more than 40 years RK supplies all major Japanese motorcycle manufacturers as original equipment.
Also in racing RC is the first choice of many teams in MotoGP, Motocross or even at the Paris-Dakar Rally.

RK XSO:

Here is an improved form of the O-ring chains. The special shape of the X-rings, the chain is sealed at four sealing points, the lubricant can not escape.
In addition, the X-ring is used as an additional lubricant reservoir. The life of the chain is extended by about 30%. This technique was developed in RK for XW-Ring chain.

- X-ring chain
- Four sealing points
- Lubricant can not escape
- Life is compared to the O-ring chain extended by 30%
- Further development of the X-rings are the XW-rings

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
93,50 EUR
incl. 20% tax excl. Shipping costs
Sprocket lock plate Honda XRV 650 RD03 Africa Twin 1988-1989
Sprocket lock plate Honda XRV 650 RD03 Africa Twin 1988-1989
NEW original Honda spare parts
Sprocket lock plate
Honda part number: 23811-MN8-000

for Honda XRV 650 RD03 Africa Twin 1988-1989
8,90 EUR
incl. 20% tax excl. Shipping costs
SPROCKET NUT JMP by PRO BOLT M10X1.25MM Titanium Black : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7759104-RD03)
SPROCKET NUT JMP by PRO BOLT M10X1.25MM Titanium Black : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7759104-RD03)
Nut sprocket Pro Bolt

Made of durable 6AL4V grade 5 aircraft titanium, which offers the following advantages:

- excellent corrosion resistance
- exceeds the grade 8.8 for steel
- 42% lighter than steel

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
9,90 EUR
incl. 20% tax excl. Shipping costs
SPROCKET NUT JMP by PROBOLT
SPROCKET NUT JMP by PROBOLT M10X1.25MM Alu Drilled Black : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7759097-RD03)
Sprocket Nut Pro Bolt

Drilling the Race Spec nuts allows additional use of fuse wire.

Made of high-strength aluminum aircraft. - colored anodised
Up to 60% lighter than steel.
The thread of the nut is made of DTD734 stainless steel.

Attention: A torque of max. 44 Nm is recommended!

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
4,90 EUR
incl. 20% tax excl. Shipping costs
SPROCKET NUT JMP by PROBOLT
SPROCKET NUT JMP by PROBOLT M10X1.25MM Alu Drilled Blue : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7759096-RD03)
Sprocket Nut Pro Bolt

Drilling the Race Spec nuts allows additional use of fuse wire.

Made of high-strength aluminum aircraft. - colored anodised
Up to 60% lighter than steel.
The thread of the nut is made of DTD734 stainless steel.

Attention: A torque of max. 44 Nm is recommended!

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
5,40 EUR
incl. 20% tax excl. Shipping costs
SPROCKET NUT JMP by PROBOLT
SPROCKET NUT JMP by PROBOLT M10X1.25MM Alu Drilled Gold : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7759098-RD03)
Sprocket Nut Pro Bolt

Drilling the Race Spec nuts allows additional use of fuse wire.

Made of high-strength aluminum aircraft. - colored anodised
Up to 60% lighter than steel.
The thread of the nut is made of DTD734 stainless steel.

Attention: A torque of max. 44 Nm is recommended!

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
4,70 EUR
incl. 20% tax excl. Shipping costs
SPROCKET NUT JMP by PROBOLT
SPROCKET NUT JMP by PROBOLT M10X1.25MM Alu Drilled Orange : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7759099-RD03)
Sprocket Nut Pro Bolt

Drilling the Race Spec nuts allows additional use of fuse wire.

Made of high-strength aluminum aircraft. - colored anodised
Up to 60% lighter than steel.
The thread of the nut is made of DTD734 stainless steel.

Attention: A torque of max. 44 Nm is recommended!

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
4,70 EUR
incl. 20% tax excl. Shipping costs
SPROCKET NUT JMP by PROBOLT
SPROCKET NUT JMP by PROBOLT M10X1.25MM Alu Drilled Red : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7759100-RD03)
Sprocket Nut Pro Bolt

Drilling the Race Spec nuts allows additional use of fuse wire.

Made of high-strength aluminum aircraft. - colored anodised
Up to 60% lighter than steel.
The thread of the nut is made of DTD734 stainless steel.

Attention: A torque of max. 44 Nm is recommended!

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
4,70 EUR
incl. 20% tax excl. Shipping costs
SPROCKET NUT JMP by PROBOLT
SPROCKET NUT JMP by PROBOLT M10X1.25MM Alu Drilled Silver : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7759101-RD03)
Sprocket Nut Pro Bolt

Drilling the Race Spec nuts allows additional use of fuse wire.

Made of high-strength aluminum aircraft. - colored anodised
Up to 60% lighter than steel.
The thread of the nut is made of DTD734 stainless steel.

Attention: A torque of max. 44 Nm is recommended!

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
5,30 EUR
incl. 20% tax excl. Shipping costs
SPROCKET NUT JMP by PROBOLT M10X1.25MM Titanium Blue : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7759103-RD03)
SPROCKET NUT JMP by PROBOLT M10X1.25MM Titanium Blue : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7759103-RD03)
Nut sprocket Pro Bolt

Made of durable 6AL4V grade 5 aircraft titanium, which offers the following advantages:

- excellent corrosion resistance
- exceeds the grade 8.8 for steel
- 42% lighter than steel

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
9,90 EUR
incl. 20% tax excl. Shipping costs
SPROCKET NUT JMP by PROBOLT M10X1.25MM Titanium Gold : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7759102-RD03)
SOLD OUT
SPROCKET NUT JMP by PROBOLT M10X1.25MM Titanium Gold : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7759102-RD03)
Nut sprocket Pro Bolt

Made of durable 6AL4V grade 5 aircraft titanium, which offers the following advantages:

- excellent corrosion resistance
- exceeds the grade 8.8 for steel
- 42% lighter than steel

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
9,90 EUR
incl. 20% tax excl. Shipping costs
Sprocket screw fastening Honda XRV 650 RD03 Africa Twin 1988-1989
Sprocket screw fastening Honda XRV 650 RD03 Africa Twin 1988-1989
NEW original Honda spare parts
Sprocket screw fastening
Honda part number: 90128-MM9-000

for Honda XRV 650 RD03 Africa Twin 1988-1989
3,60 EUR
incl. 20% tax excl. Shipping costs
Sprocket SUPERPINION 525 15T Honda XRV 650 RD03 Africa Twin 1988-1989
Sprocket SUPERPINION 525 15T Honda XRV 650 RD03 Africa Twin 1988-1989
A valid alternative to the any other pinion

The original pinion shapes have been remodeled to allow it to gripe ALL DENTATURE of the secondary transmission shaft
In order to pursue the objective, the locking type has also been changed, which is no longer in frontal but lateral mode.

• Prevents theet wear even with intensive use (off-road, racing)
• IT CARE THE DAMAGES created by the old sprockets, postponing the onerous SHAFT REPLACEMENT
• Being more stable, it facilitates constant alignment with the chain and crown, making the System movement move more smoothly and prolonging its life cycle

Each pack includes locking plates and screws

Pitch: 525
Fitting: Narrow Spline
Type: SUPERPINION
Manufacturer: KKBIKE
Number of teeth: 15

for Honda XRV 650 RD03 Africa Twin 1988-1989
59,90 EUR
incl. 20% tax excl. Shipping costs
Sprocket SUPERPINION 525 16T Honda XRV 650 RD03 Africa Twin 1988-1989
Sprocket SUPERPINION 525 16T Honda XRV 650 RD03 Africa Twin 1988-1989
A valid alternative to the any other pinion

The original pinion shapes have been remodeled to allow it to gripe ALL DENTATURE of the secondary transmission shaft
In order to pursue the objective, the locking type has also been changed, which is no longer in frontal but lateral mode.

• Prevents theet wear even with intensive use (off-road, racing)
• IT CARE THE DAMAGES created by the old sprockets, postponing the onerous SHAFT REPLACEMENT
• Being more stable, it facilitates constant alignment with the chain and crown, making the System movement move more smoothly and prolonging its life cycle

Each pack includes locking plates and screws

Pitch: 525
Fitting: Narrow Spline
Type: SUPERPINION
Manufacturer: KKBIKE
Number of teeth: 16

for Honda XRV 650 RD03 Africa Twin 1988-1989
59,90 EUR
incl. 20% tax excl. Shipping costs
SPROCKET WASHER JMP FRONT SPROCKET : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7269950-RD03)
SPROCKET WASHER JMP FRONT SPROCKET : Honda XRV 650 Africa Twin RD03 88-90 (H7-M7269950-RD03)
Safety plate JMP

corresponds to the OE locking plate.

Price Unit: 1 Unit

for Honda XRV 650 Africa Twin RD03 1988-1990
5,90 EUR
incl. 20% tax excl. Shipping costs
31 to 47 (from a total of 47)