Main page » NEW Bike Parts and Accessories » XL 600 V Transalp PD10 » Brakes » Brakes rear

Brakes rear

BRAKE BLEED NIPPLE M8X1.25 16MM INCL VALVE front rear : Honda XL 600 V Transalp PD10 97-00 (H7-M7570005-PD10)

Steel bus venting valve

M8 x 1.25 (maximum insertion length16mm)

Innovative quick-release screw for the safe, clean and fast venting and filling of hydraulic brakes and clutches on all motor vehicles. Single hand operation without external help.

Also particularly suitable for the exchange of rubber against steel flex cables.

CNC precision nickel-plated brass for replacement against conventional venting nipples.

Colored cap is not included in the scope of delivery - can be ordered as an accessory.

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000 front rear

27,70 EUR

incl. 20% tax excl. Shipping costs

BRAKE CALIPER REPAIR KIT ALL BALLS RACING rear : Honda XL 600 V Transalp PD10 97-00 (H7-M7171294-PD10)

Brake Caliper Repair Kit from All Balls Racing

- Contains all parts needed to repair the calipers
- depending on the vehicle for one or two calipers

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 rear

27,90 EUR

incl. 20% tax excl. Shipping costs

BRAKE PADS SINTERED HH EBC FA140HH rear : Honda XL 600 V Transalp PD10 97-00 (H7-M7329121-PD10)

EBC Brake Pads Double - H

MADE IN USA for motorbikes with original sintered blocks

A quality with the highest braking power, extreme durability and without any

Fading especially for use with heavy and fast machines

Or during street racing.

Best suited for INOX or EBC Pro-Lite brake discs.

Brake pads are also ideal for cast brake discs.

Double - H brake pads are TÜV tested and have an ABE.

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 rear

29,90 EUR

incl. 20% tax excl. Shipping costs

MASTER CYLINDER REPAIR KIT ALL BALLS RACING rear : Honda XL 600 V Transalp PD10 97-00 (H7-M7170062-PD10)

Main brake cylinder repair kit from All Balls Racing

Contains all necessary parts to repair the main brake cylinder.

Content:
2 cuffs
2 sealing rings
1 bellows
1 spring
2 Sprengrings
1 O-ring

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 rear

30,50 EUR

incl. 20% tax excl. Shipping costs

BRAKE PADS REAR SINTERED SH TRW rear : Honda XL 600 V Transalp PD10 97-00 (H7-M7871668-PD10)

SH coating mixture
Full metal sintering surface with special finish.
High friction coefficient, guarantees very good performance.
Can be used on almost all discs.
Only in exchange for sintered linings in the original equipment.
Only conditionally applicable in racing, since no heat resistance from 400 degrees.
The friction coefficient is adjusted to the SV surface.
Only for rear axle use.

Price Unit: 1 Set

for Honda XL 600 V Transalp PD10 1997-2000 rear

30,90 EUR

incl. 20% tax excl. Shipping costs

BRAKE DISC EBC MX/ENDURO/ATV rear : Honda XL 600 V Transalp PD10 97-00 (H7-M7604044-PD10)

EBC MX brake disc for offroad motorcycles. MADE IN UK.

The aim of the development is to improve the braking behavior compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher friction coefficient. This steel is significantly more resistant to rust than cast steel. In addition, the entire surface is protected by a 3 micron thick zinc layer, which is already abraded in the area of the brake lining contact zone when braking. It is only in this area that it is easier to form rust rust with a longer service life.

The brake discs are drilled in the bird's swing signal to get rid of the rainwater and brake dust with as few holes as possible while simultaneously cleaning the brake disc. The less drill holes are installed, the better the wet braking behavior and the lower the wear.

- Rigid brake disc.
- Made from heat-treated carbon steel.
- Braked surface with optimized hole pattern.
- Radially ground.
- Galvanized for protection against corrosion.
- EBC recommends EBC Organic TT brake pads or for sporty drivers EBC sintered brake blocks in R or MXS mixture.
- Stand-alone design.
- The thickness of the brake disc may vary from the original part.

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000 rear

84,90 EUR

incl. 20% tax excl. Shipping costs

BRAKE DISC TRW LUCAS RIGID rear : Honda XL 600 V Transalp PD10 97-00 (H7-M7880081-PD10)

All brake discs have an ABE, also for scooters.

The washers are low-wear and have an up to 30% longer service life compared to some comparable spare parts.

All variants: Allround, RAC and EC-offroad discs, consist of extremely dimensionally stable and hardened steel.

The precise surface grinding (thickness deviation of 2 / 100mm) avoids vibrations and improves the adaptation of the linings.

A uniform temperature rise and fall allows for a constant pressure point.

A new special alloy prevents excessive corrosion.
Laser technology allows a light construction with fine contours.

Each brake disc can be individually driven with brake linings from the TRW-Lucas range.
TRW-Lucas floating brake disc Allround

- Round outer contour with perforated braking edge
- In rigid and floating versions
- Matched design from front to rear axle

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000 rear

89,90 EUR

incl. 20% tax excl. Shipping costs

BRAKE DISC RAC TRW RIGID rear : Honda XL 600 V Transalp PD10 97-00 (H7-M7880990-PD10)

All brake discs have an ABE, also for scooters.

The washers are low-wear and have an up to 30% longer service life compared to some comparable spare parts.

All variants: Allround, RAC and EC-offroad discs, consist of extremely dimensionally stable and hardened steel.

The precise surface grinding (thickness deviation of 2 / 100mm) avoids vibrations and improves the adaptation of the linings.

A uniform temperature rise and fall allows for a constant pressure point.

A new special alloy prevents excessive corrosion.
Laser technology allows a light construction with fine contours.

Each brake disc can be individually driven with brake linings from the TRW-Lucas range.
TRW-Lucas floating brake disc RAC

- Notched outer contour with slotted braking edge
- In rigid and floating versions
- Matched design from front to rear axle

Price Unit: 1 Unit

for Honda XL 600 V Transalp PD10 1997-2000 rear

93,50 EUR

incl. 20% tax excl. Shipping costs

EBC Brake set rear pad disc Honda XL 600 V Transalp PD10 1997-2000

1 set EBC Black Stuff brake pads (organic) and
1 piece EBC brake discs

Organic Aramid brake pads street legal.
Rigid disc. Made from heat-treated carbon steel. Drilled braking surface with optimized hole pattern. Radial honed. Galvanized for protection against corrosion. Independent design. Thickness of the brake disc may differ from the original part.

for Honda XL 600 V Transalp PD10 1997-2000

103,50 EUR

incl. 20% tax excl. Shipping costs

31 to 39 (from a total of 39)