XL 700 V Transalp RD13ABS

Hiflo air filter

The air filters from Hiflo have been specially developed for modern "high performance" engines and adapted to the original air filter box.
The filters are a direct replacement to the OE filter.

There is no need to change any settings and carburetor nozzles do not need to be changed.
For the production of the filters only high quality materials are used.

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

The original K & N exchange air filter

The K & N air filters are simply replaced with the standard air filters. There are no changes to the system
necessary. The standard setting on the carburetor does not need to be changed. By using K & N
Air filters result in no loss of performance, on the contrary because the potential of the air filter box is optimized. Noise and
Emission regulations are complied with. K & N air filters have the same service life as the engines and therefore make it possible
Significant savings on filter purchases. The unique filter system can extend the life of the engines and
optimally protects against dangerous dust, sand etc. K & N filters are fully washable permanent filters with little maintenance
can be used again and again without losing filter effect and air flow.

- High airflow with excellent filtration
- Designed to increase horsepower and acceleration
- Washable and reusable
- Economical; A K & N air filter will last for the life of the engine
- maintenance interval; up to 80,000 km before cleaning is required, depending on the road use
- Compatible with OEM vehicle electronics
- Environmentally friendly

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

Valve cap Pro Bolt
With these pretty little tire valve covers, the dirt remains outside and an airtight finish
is guaranteed.
Universally suitable for cars and motorcycles.

Material: Color anodised aluminum

Color: Black

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

Valve Cap Pro Bolt
With these pretty little tire valve covers, the dirt stays out and an airtight finish
is guaranteed.
Universally suitable for cars and motorcycles.

Material: Color anodized aluminum

Colour Blue

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

Valve Cap Pro Bolt
With these pretty little tire valve covers, the dirt stays out and an airtight finish
is guaranteed.
Universally suitable for cars and motorcycles.

Material: Color anodized aluminum

Color gold

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

Valve Cap Pro Bolt
With these pretty little tire valve covers, the dirt stays out and an airtight finish
is guaranteed.
Universally suitable for cars and motorcycles.

Material: Color anodized aluminum

Color orange

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

Valve Cap Pro Bolt
With these pretty little tire valve covers, the dirt stays out and an airtight finish
is guaranteed.
Universally suitable for cars and motorcycles.

Material: Color anodized aluminum

Red color

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

Valve Cap Pro Bolt
With these pretty little tire valve covers, the dirt stays out and an airtight finish
is guaranteed.
Universally suitable for cars and motorcycles.

Material: Color anodized aluminum

Silver

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

Axle nut JMP

Made from 316 stainless steel, which provides the following benefits:

- Excellent strength
- Excellent corrosion resistance
- High resistance to acids

The stainless steel screws are offered all polished to a shine.

Stainless steels are ferrous alloys with a minimum of 10.5% chromium, added with other elements (nickel, molybdenum, titanium, copper, carbon, nitrogen), in order to increase properties such as moldability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.

Package Contents: 1 piece

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010 rear

Lithium ion battery with surge protection from Skyrich

Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM and Ducati.
The Power Sports LTM-Line lithium-ion batteries are characterized by a heat-resistant, waterproof nylon housing and improved pole connections.

Overcharge protection (OP)
The Skyrich battery has an advanced Battery Management System (BMS), which in addition to the balancers (ensures uniform charge / discharge of the battery) also includes an overvoltage protection. This prevents the battery from being charged with a voltage higher than 14.9V.

Spacer (S)
Battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip, so that the battery fits exactly into the battery box.

Waterproof (WP)
The battery is completely waterproof and takes no damage when the motorcycle is being cleaned with high pressure.

Indicator (I)
All batteries are equipped with an improved charge indicator, which shows the state of charge of the battery even more precisely.

Replacing a standard lead-acid battery with a Skyrich lithium-ion battery can save up to 5 kg in weight, with no significant effort.
The following advantages speak for Skyrich lithium-ion batteries:
- integrated overvoltage protection
- About 1/3 of the weight of the comparable lead-acid battery
- improved pole connections made of brass for best conductivity
- waterproof
- completely black battery case
- Battery housing made of nylon, therefore, deformation under heat is practically impossible
- Unbeatable cost / weight savings ratio
- Can be installed in any position, as it contains no acid
- contains no heavy metals
- balanced discharge / charge of all cells by balancers
- Fast charging with high charging current possible (up to 90% in 6 min)
- very low self-discharge (max 5% per month)
- even at high temperatures still good performance up to 60 ° C
- safe technology and long service life

Due to their specific properties, lead-acid batteries can only use 30% of their capacity, while lithium-ion batteries can use almost 100% of their capacity.
For this reason, the lithium versions of the Skyrich batteries require only 1/3 the capacity of a comparable lead-acid battery for the same starting power.
The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries using adapters.
The connections are identical, which is why the battery can be replaced in just a few minutes without any further adjustments.

Please note that only suitable chargers may be used for charging. We recommend JMP chargers.
For the maximum recommended charging currents, please refer to the technical data below.

Under no circumstances should chargers be used which attempt to desulphurate deep-discharged batteries under 10 volts with a voltage of more than 14.9 volts before they begin the actual charge.
There is a danger of explosion.

The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.

technology
Skyrich lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium-polymer process in their manufacture. As a result, they can neither go up in flames nor explode during normal operation.
The technology and the manufacturing process guarantee the highest safety standard for lithium batteries.

- 12 V maintenance-free lithium-ion battery
- Charging current recommended 2 A
- maximum charge current for fast charge 20 A

Identical in construction to:

YTX14H-BS
YTX12A-BS
KMX14-BS
YTZ14S
YTX14-BS
YTX12-BS
YTZ12S

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

Lithium ion battery with surge protection from Skyrich

Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM and Ducati.
The Power Sports LTM-Line lithium-ion batteries are characterized by a heat-resistant, waterproof nylon housing and improved pole connections.

Overcharge protection (OP)
The Skyrich battery has an advanced battery management system (BMS), which in addition to the balancers (ensures uniform charge / discharge of the battery) also includes an overvoltage protection. This prevents the battery from being charged with a voltage higher than 14.9V.

Spacer (S)
Battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip, so that the battery fits exactly into the battery box.

Waterproof (WP)
The battery is completely waterproof and takes no damage when the motorcycle is being cleaned at high pressure.

Indicator (I)
All batteries are equipped with an improved charge indicator, which shows the state of charge of the battery even more precisely.

Replacing a standard lead-acid battery with a Skyrich lithium-ion battery can save up to 5 kg in weight, with no significant effort.
The following advantages speak for Skyrich lithium-ion batteries:
- integrated overvoltage protection
- About 1/3 of the weight of the comparable lead-acid battery
- improved pole connections made of brass for best conductivity
- waterproof
- completely black battery case
- Battery housing made of nylon, therefore, deformation under heat is practically impossible
- Unbeatable cost / weight savings ratio
- Can be installed in any position, as it contains no acid
- contains no heavy metals
- balanced discharge / charge of all cells by balancers
- Fast charging with high charging current possible (up to 90% in 6 min)
- very low self-discharge (max 5% per month)
- even at high temperatures still good performance up to 60 ° C
- safe technology and long service life

Due to their specific properties, lead-acid batteries can only use 30% of their capacity, while lithium-ion batteries can use almost 100% of their capacity.
For this reason, the lithium versions of the Skyrich batteries require only 1/3 the capacity of a comparable lead-acid battery for the same starting power.
The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries using adapters.
The connections are identical, which is why the battery can be replaced in just a few minutes without any further adjustments.

Please note that only suitable chargers may be used for charging. We recommend JMP chargers.
For the maximum recommended charging currents, please refer to the technical data below.

Under no circumstances should chargers be used which attempt to desulphurate deep-discharged batteries under 10 volts with a voltage of more than 14.9 volts before they begin charging.
There is a danger of explosion.

The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.

technology
Skyrich lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium-polymer process in their manufacture. As a result, they can neither go up in flames nor explode during normal operation.
The technology and the manufacturing process guarantee the highest safety standard for lithium batteries.

- 12 V maintenance-free lithium-ion battery
- Charging current recommended 2.5 A
- maximum charge current for fast charge 22 A

Identical in construction to:

YB16B-A
YB16C-B
YTX16-BS-1
YB16B-A1YB18-A
YTX16-BS
Yb16-B-CX
HYB16A AB
Yb16-B

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

Lithium ion battery with surge protection from Skyrich

Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM and Ducati.
The Power Sports LTM-Line lithium-ion batteries are characterized by a heat-resistant, waterproof nylon housing and improved pole connections.

Overcharge protection (OP)
The Skyrich battery has an advanced battery management system (BMS), which in addition to the balancers (ensures uniform charge / discharge of the battery) also includes an overvoltage protection. This prevents the battery from being charged with a voltage higher than 14.9V.

Spacer (S)
Battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip, so that the battery fits exactly into the battery box.

Waterproof (WP)
The battery is completely waterproof and takes no damage when the motorcycle is being cleaned with high pressure.

Indicator (I)
All batteries are equipped with an improved charge indicator, which shows the state of charge of the battery even more precisely.

By replacing a standard lead-acid battery with a Skyrich lithium-ion battery, you can save up to 5 kg of weight without significant effort.
The following advantages speak for Skyrich lithium-ion batteries:
- integrated overvoltage protection
- About 1/3 of the weight of the comparable lead-acid battery
- improved pole connections made of brass for best conductivity
- waterproof
- completely black battery case
- Battery housing made of nylon, therefore, deformation under heat is practically impossible
- Unbeatable cost / weight savings ratio
- Can be installed in any position, as it contains no acid
- contains no heavy metals
- balanced discharge / charge of all cells by balancers
- Fast charging with high charging current possible (up to 90% in 6 min)
- very low self-discharge (max 5% per month)
- even at high temperatures still good performance up to 60 ° C
- safe technology and long service life

Due to their specific properties, lead-acid batteries can only use 30% of their capacity, while lithium-ion batteries can use almost 100% of their capacity.
For this reason, the lithium versions of the Skyrich batteries require only 1/3 the capacity of a comparable lead-acid battery for the same starting power.
The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries using adapters.
The connections are identical, which is why the battery can be replaced in just a few minutes without any further adjustments.

Please note that only suitable chargers may be used for charging. We recommend JMP chargers.
For the maximum recommended charging currents, please refer to the technical data below.

Under no circumstances should chargers be used which attempt to desulphurate deep-discharged batteries under 10 volts with a voltage of more than 14.9 volts before they begin charging.
There is a danger of explosion.

The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.

technology
Skyrich lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium-polymer process in their manufacture. As a result, they can neither go up in flames nor explode during normal operation.
The technology and the manufacturing process guarantee the highest safety standard for lithium batteries.

- 12 V maintenance-free lithium-ion battery
- Charging current recommended 3 A
- maximum charge current for fast charge 24 A

Identical in construction to:

HVT 8
Y50-N18A-A
GYZ16H
YTX20H-BS
YTX20CH-BS

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

JMT maintenance-free (MF) motorcycle battery gel

- Maintenance-free JMT starter battery in proven and reliable brand quality.
- the battery is already filled with a gel electrolyte and therefore absolutely leak-proof.
- longer service life, increased cold start performance and lower self-discharge compared to standard batteries.
- Vibration resistant


Identical in construction to:

GS Manufacturer number GTZ14S

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

6-On Maintenance-free (MF) motorcycle battery
- Inexpensive maintenance-free high-performance starter battery in proven and reliable quality
- Leak-proof due to AGM technology (Absorbed Glass Mat)
- Leak-proof pressure relief valve prevents ignition of the electrolyte at overpressure
- vibration resistant
- Up to 3x longer life compared to standard batteries
- Advanced lead calcium technology increases cold start performance
- Maintenance-free batteries do not require replenishment of distilled water
- The battery is filled with acid at the factory and closed.

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

JMT Maintenance-free (MF) motorcycle battery
- Maintenance-free high-performance starter battery in proven and reliable brand quality
- Leak-proof due to AGM technology (Absorbed Glass Mat)
- Leak-proof pressure relief valve prevents ignition of the electrolyte at overpressure
- vibration resistant
- Up to 3x longer life compared to standard batteries
- Advanced lead calcium technology increases cold start performance
- Maintenance-free batteries do not require replenishment of distilled water
- The battery is filled with acid at the factory and closed

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

Yuasa Maintenance-free motorcycle battery high-performance

- Maintenance-free high-performance starter battery in reliable brand quality
- leak-proof by AGM technology (Absorbed glass mat)
- Outflow-proof pressure relief valve prevents ignition of the electrolyte at overpressure
- Vibration resistant
- Up to 3x longer lifetime compared to standard batteries
- Advanced lead-calcium technology increases start-up performance
- Sulfate-Stop significantly restricts the plate sulphation
- Maintenance-free batteries do not need refilling of distilled water
- By a connected battery housing prevents leakage and corrosion
- The high-performance battery features a radiating grating design and additional panels to provide up to 30% higher cold start-up performance
- The battery is filled with acid at the factory and charged


Identical in construction to:

GS Manufacturer number GTZ14S

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

Lithium-ion batteries by JMT, High-technology for your motorcycle.

The latest generation of batteries are identified by the red cover.

Spacer (S)
Batteries may be equipped with one or more spacers that are taped with adhesive tape under the battery so that the battery fits exactly into the original battery box.

Indicator (I)
All batteries are equipped with a battery condition indicator.
Simply press the test button. When all three blue LEDs light up the battery is fully charged(ful). If it lights only 2 LEDs, it is only half charged (med). When only one LED is lit (low), the battery must be charged immediately.

Replacing a standard lead-acid battery by a JMT lithium-ion batter can save you up to up to 5 kg in weight with minimum effort.

JMT lithium-ion batteries have the following benefits:
- About 1/3 of the weight of comparable lead acid battery
- Unbeatable ratio of cost/weight savings
- Can be mounted in any position - no acid spillage
- Does not contain heavy metals
- Balanced discharge/charge of all cells by the integral balancer
- Fast charging with high ampage systems (up to 90% fully charged in only 6 minutes)
- Very low self-discharge - long shelf life (up to 5% per month)
- Excellent performance at high temperatures (even up to
60° C)
- Safe technology and high durability

Lead-acid batteries only use 30% of their capacity
whilst nearly 100% of the capacity of lithium-ion batteries is used. For this reason, lithium versions of JMT batteries need only 1/3 of the capacity of a comparable lead-acid battery for the same starting power.

A uniform charging of all the cells is ensured by a built-in processor (the "balancer").

The dimensions of the lithium-ion batteries (using adapters where necessary)correspond to the dimensions of the original lead-acid batteries and the connections are identical, thus the battery can be replaced easily in a few minutes.

*** IMPORTANT ***

Please note that only suitable battery chargers are used, such as the JMP 800, JMP 4000 or the corresponding workshop equipment. Please ensure that a compatible charger is used as a wrong charger will invalidate the 2 year warranty.

For fast charging, we recommend the JMP 30000 workshop unit. With this a lithium-ion battery can be charged up to 90% within 6 minutes. For the maximum recommended charging currents please refer to the technical data below.

In no case must chargers be use that have a de-sulphate mode for deeply discharged batteries (i.e showing 10 volts or less) These chargers use an output of more than 14.9 volts before they begin the actual charging cycle.
The maximum charging voltage of 14.9 volts must not be exceeded in any case, as in extreme circumstances there can be a danger of explosion.

Although this lightweight battery is extremely suitable for everyday use, it should be noted that the starting capacity is reduced at temperatures below zero degrees Celsius.

Technology - JMT lithium-ion batteries are manufactured using a cathode material of iron phosphate (LiFePO4) and lithium-polymer.

The technology and the manufacturing process ensure the highest safety standard for lithium batteries.

- 12 V maintenance-free lithium-ion battery
- Recommended charging current 2 A
- Maximum charging current for fast charging 22 A


Comparable in moderation and connections with:
Yuasa Mfr No.
YTZ12S
YTZ14S

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010

Breather Nissin

Made in Japan

Thread: M8X1,25

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010 front rear

Bleed screw JMP

- With cap
- Material: steel
- Thread: M8X1,25
- Total length: 27 mm
- Color: Black

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010 front rear

Bleed screw JMP

- With cap
- Material: galvanized steel
- Thread: M8X1,25
- Total length: 27 mm

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010 front rear

Steel bus venting valve

M8 x 1.25 (maximum insertion length16mm)

Innovative quick-release screw for the safe, clean and fast venting and filling of hydraulic brakes and clutches on all motor vehicles. Single hand operation without external help.

Also particularly suitable for the exchange of rubber against steel flex cables.

CNC precision nickel-plated brass for replacement against conventional venting nipples.

Colored cap is not included in the scope of delivery - can be ordered as an accessory.

Price Unit: 1 Unit

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010 front rear

Brake Caliper Screws Set Pro Bolt


Made of durable 6AL4V grade 5 aircraft titanium, which offers the following advantages:

- excellent corrosion resistance
- exceeds the grade 8.8 for steel
- 42% lighter than steel

The kit corresponds to the original assembly of the brake caliper mounting screws.

Price Unit: 1 Set

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010 front

Brake caliper pistons Tourmax

Made in Japan

Price Unit: 1 Set

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010 front

Brake caliper pistons Tourmax

Made in Japan

Price Unit: 1 Set

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010 rear

Brake caliper piston repair kit Tourmax

Made in Japan

Contains all parts needed to replace a caliper piston.

Price Unit: 1 Set

for Honda XL 700 VA Transalp ABS RD13ABS 2008-2010 front