Electric

Lithium ion battery with surge protection from Skyrich

Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM and Ducati.
The Power Sports LTM-Line lithium-ion batteries are characterized by a heat-resistant, waterproof nylon housing and improved pole connections.

Overcharge protection (OP)
The Skyrich battery has an advanced battery management system (BMS), which in addition to the balancers (ensures uniform charge / discharge of the battery) also includes an overvoltage protection. This prevents the battery from being charged with a voltage higher than 14.9V.

Spacer (S)
Battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip, so that the battery fits exactly into the battery box.

Waterproof (WP)
The battery is completely waterproof and takes no damage when the motorcycle is being cleaned with high pressure.

Indicator (I)
All batteries are equipped with an improved charge indicator, which shows the state of charge of the battery even more precisely.

By replacing a standard lead-acid battery with a Skyrich lithium-ion battery, you can save up to 5 kg of weight without significant effort.
The following advantages speak for Skyrich lithium-ion batteries:
- integrated overvoltage protection
- About 1/3 of the weight of the comparable lead-acid battery
- improved pole connections made of brass for best conductivity
- waterproof
- completely black battery case
- Battery housing made of nylon, therefore, deformation under heat is practically impossible
- Unbeatable cost / weight savings ratio
- Can be installed in any position, as it contains no acid
- contains no heavy metals
- balanced discharge / charge of all cells by balancers
- Fast charging with high charging current possible (up to 90% in 6 min)
- very low self-discharge (max 5% per month)
- even at high temperatures still good performance up to 60 ° C
- safe technology and long service life

Due to their specific properties, lead-acid batteries can only use 30% of their capacity, while lithium-ion batteries can use almost 100% of their capacity.
For this reason, the lithium versions of the Skyrich batteries require only 1/3 the capacity of a comparable lead-acid battery for the same starting power.
The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries using adapters.
The connections are identical, which is why the battery can be replaced in just a few minutes without any further adjustments.

Please note that only suitable chargers may be used for charging. We recommend JMP chargers.
For the maximum recommended charging currents, please refer to the technical data below.

Under no circumstances should chargers be used which attempt to desulphurate deep-discharged batteries under 10 volts with a voltage of more than 14.9 volts before they begin charging.
There is a danger of explosion.

The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.

technology
Skyrich lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium-polymer process in their manufacture. As a result, they can neither go up in flames nor explode during normal operation.
The technology and the manufacturing process guarantee the highest safety standard for lithium batteries.

- 12 V maintenance-free lithium-ion battery
- Charging current recommended 2 A
- maximum charge current for fast charge 20 A

Identical in construction to:

YB14-A2
YT12B-BS
YTX14AH-BS
YB10A-A2
YB14A-A2
12N12A-4A1
YB14A-A1
YB12A-B
HVT 9
YB12C-A
YT14B-BS
YB14-B2
YB12B-B2
YTZ10S
YB12A-A

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992

Lithium-ion batteries by JMT, High-technology for your motorcycle.

The latest generation of batteries are identified by the red cover.

Spacer (S)
Batteries may be equipped with one or more spacers that are taped with adhesive tape under the battery so that the battery fits exactly into the original battery box.

Waterproof (W)
The battery is completely waterproof and is not damaged, even if the motorcycle is cleaned with high pressure.


Indicator (I)
All batteries are equipped with a battery condition indicator.
Simply press the test button. When all three blue LEDs light up the battery is fully charged(ful). If it lights only 2 LEDs, it is only half charged (med). When only one LED is lit (low), the battery must be charged immediately.

Replacing a standard lead-acid battery by a JMT lithium-ion batter can save you up to up to 5 kg in weight with minimum effort.

JMT lithium-ion batteries have the following benefits:
- About 1/3 of the weight of comparable lead acid battery
- Unbeatable ratio of cost/weight savings
- Can be mounted in any position - no acid spillage
- Does not contain heavy metals
- Balanced discharge/charge of all cells by the integral balancer
- Fast charging with high ampage systems (up to 90% fully charged in only 6 minutes)
- Very low self-discharge - long shelf life (up to 5% per month)
- Excellent performance at high temperatures (even up to
60° C)
- Safe technology and high durability

Lead-acid batteries only use 30% of their capacity
whilst nearly 100% of the capacity of lithium-ion batteries is used. For this reason, lithium versions of JMT batteries need only 1/3 of the capacity of a comparable lead-acid battery for the same starting power.

A uniform charging of all the cells is ensured by a built-in processor (the "balancer").

The dimensions of the lithium-ion batteries (using adapters where necessary)correspond to the dimensions of the original lead-acid batteries and the connections are identical, thus the battery can be replaced easily in a few minutes.

*** IMPORTANT ***

Please note that only suitable battery chargers are used, such as the JMP 800, JMP 4000 or the corresponding workshop equipment. Please ensure that a compatible charger is used as a wrong charger will invalidate the 2 year warranty.

For fast charging, we recommend the JMP 30000 workshop unit. With this a lithium-ion battery can be charged up to 90% within 6 minutes. For the maximum recommended charging currents please refer to the technical data below.

In no case must chargers be use that have a de-sulphate mode for deeply discharged batteries (i.e showing 10 volts or less) These chargers use an output of more than 14.9 volts before they begin the actual charging cycle.
The maximum charging voltage of 14.9 volts must not be exceeded in any case, as in extreme circumstances there can be a danger of explosion.

Although this lightweight battery is extremely suitable for everyday use, it should be noted that the starting capacity is reduced at temperatures below zero degrees Celsius.

Technology - JMT lithium-ion batteries are manufactured using a cathode material of iron phosphate (LiFePO4) and lithium-polymer.

The technology and the manufacturing process ensure the highest safety standard for lithium batteries.

- 12 V maintenance-free lithium-ion battery
- Recommended charging current 2.5 A
- Maximum charging current for fast charging 24 A


Comparable in moderation and connections with:
Yuasa Manufacturer Part Number
YTX14AH-BS
YB14-A2
YB14A-A1
YB14A-A2
YB14-B2
YTX14AHL-BS
YTX14LBS
YB14L-A1
YB14L-A2
YB14L-B2
SYB14L-A2
SYB14L-B2
12N14-3A

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992

Blinker left / right
depending on vehicle front / rear

for Honda XRV 750 RD04 Africa Twin

JMP brake light switch

The brake light switches of JMP correspond in shape and function to the original part.

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992 front

OSRAM Original 12 V Line

OEM
Convincing brightness and reliability

Applications: direction indicators (blinkers), brake, fog and reversing light

Contents: 2

Package: 10

Price Unit: 1 Pack

for Honda XRV 750 Africa Twin RD04 1990-1992

JMP metal socket lamp P21 / 5W

Applications: Direction indicators (turn signals), brake, fog and reversing lights

Price Unit: 1 Pack

for Honda XRV 750 Africa Twin RD04 1990-1992

JMP metal socket lamp P21W

Applications: Direction indicators (turn signals), brake, fog and reversing lights

Price Unit: 1 Pack

for Honda XRV 750 Africa Twin RD04 1990-1992

JMP starter coals for Japanese motorcycles.

As original spare part, starter coals are usually only
completely delivered and assembled on a baseplate
therefore very expensive.

12.5 x 9.8 x 5.9 mm.

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992

NEW original Honda spare parts
FUSE BOX cover
Honda part number: 38210-KR0-005

for Honda XRV 750 RD04 Africa Twin 1990-1992

NEW PART original Honda
Screw Grip Switch 4x32mm
Honda part number: 93500-040320G

for Honda XRV 750 RD04 Africa Twin

NEW PART original Honda
Screw Grip Switch 5x20mm
Honda part number: 93500-050200G

for Honda XRV 750 RD04 Africa Twin

NEW PART original Honda
Screw Grip Switch 4x45mm
Honda part number: 93500-040450G

for Honda XRV 750 RD04 Africa Twin

NEW PART original Honda
Screw Grip Switch 5x16mm
Honda part number: 93500-050160G

for Honda XRV 750 RD04 Africa Twin

Ignition coil JMP

- All stages of production are strictly monitored (from raw material to finished product)

- Compatible with industry, OEM/OES in form, fit and function

- Highest quality standards (e.g. ISO certification)

- OEM specifications are met and/or exceeded

- All products undergo rigorous validation before being released to the aftermarket

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992

Blinker glass has an official certification mark and is approved for roads.

Price Unit: 1 Unit

for Honda XRV 750 Africa Twin RD04 1990-1992

NEW PART original Honda
Oil Pressure Switch
Honda Partnumber: 35500-MJ4-024

for Honda XRV 750 RD04 Africa Twin 1990-1992

Plug for alternator to regulator, 3-pin, including pins

for Honda XRV 750 RD04 Africa Twin 1990-1992