Battery pole distributor for easy access to the motorcycle battery. Simply connect to both poles and in the future additional devices such as navigation devices or sockets for mobile phone chargers can easily be connected additionally.
- Protected connections -Easy construction -supply for + line - Length: 10 cm
Fully insulated bike battery master switch for the onboard power supply enclosure to the Discharge of the battery through constant consumer as clock, trip computer, Etc. to avoid accessory during longer breaks. By simply loosening the screw, the separation is already achieved. The screw simply loosen 1-2 turns and leave the switch. Thus they can not be lost as well. For driving please correct firmly turn.
Mini design Fully insulated housing Flexible mounting between negative and vehicle
Load max. 160A - 12V / 10 sec pause then 30 sec.. Bridge cable included. Installation instructions on product depositors
Dimensions: L / W / H: 62 x 25 x 38 mm Cable: 200 mm
- High performance and protection against deep discharge - Can also be installed laterally, allows inclination angle up to 90 ° - Guaranteed leakage safety (VRLA - with safety valve) - Suitable for motorcycles with ABS
The PowerSports lithium-ion batteries of the LTM line are characterized by a heat-resistant, waterproof nylon housing and improved pole connections.
Indicator (I)
All batteries are equipped with an improved charge level indicator, which indicates the charge level of the battery even more precisely.
Simply press the test button to display the charge level of the battery.
Replacing a standard lead-acid battery with a JMT lithium-ion battery can save up to 5 kg of weight without any significant effort.
The following advantages speak for JMT lithium-ion batteries:
- approximately 1/3 of the weight of the comparable lead-acid battery - Pole connections made of brass for best conductivity - Waterproof - completely black battery housing - Battery housing made of nylon, therefore heat distortion is practically impossible - unbeatable ratio of cost / weight savings - can be installed in any position, as no acid - does not contain heavy metals - balanced discharge / charge of all cells by balancer - Quick charge with high charging current possible (up to 90% in 6 min) - very low self-discharge (max 5% per month) - even at high temperatures still good performance up to 60 ° C - safe technology and long service life
Lead-acid batteries can only use 30% of their capacity due to the specific characteristics, while nearly 100% of capacity can be used with lithium-ion batteries.
For this reason, the lithium versions of the JMT batteries for the same starting power require only 1/3 the capacity of a comparable lead-acid battery.
An even charge state of all cells is also ensured by a built-in processor ("balancer").
The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries with the aid of adapters.
The connections are also identical, which means that the battery can be replaced in just a few minutes without further adjustments.
Please note that only suitable chargers may be used for charging. We recommend JMP chargers.
The maximum recommended charging currents can be found in the technical data below.
Under no circumstances may chargers be used to try to desulphate deep-discharge batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charge.
The maximum charge voltage of 14.9 volts must never be exceeded. There is a risk of explosion.
The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.
technology
JMT lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium polymer process in manufacturing. As a result, they can neither rise nor explode in flames during normal operation.
The technology and the manufacturing process ensure the highest safety standard for lithium batteries.
Lithium ion battery with surge protection from Skyrich
Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM and Ducati. The Power Sports LTM-Line lithium-ion batteries are characterized by a heat-resistant, waterproof nylon housing and improved pole connections.
Overcharge protection (OP) The Skyrich battery has an advanced Battery Management System (BMS), which in addition to the balancers (ensures uniform charge / discharge of the battery) also includes an overvoltage protection. This prevents the battery from being charged with a voltage higher than 14.9V.
Spacer (S) Battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip, so that the battery fits exactly into the battery box.
Waterproof (WP) The battery is completely waterproof and takes no damage when the motorcycle is being cleaned with high pressure.
Indicator (I) All batteries are equipped with an improved charge indicator, which shows the state of charge of the battery even more precisely.
Replacing a standard lead-acid battery with a Skyrich lithium-ion battery can save up to 5 kg in weight, with no significant effort. The following advantages speak for Skyrich lithium-ion batteries: - integrated overvoltage protection - About 1/3 of the weight of the comparable lead-acid battery - improved pole connections made of brass for best conductivity - waterproof - completely black battery case - Battery housing made of nylon, therefore, deformation under heat is practically impossible - Unbeatable cost / weight savings ratio - Can be installed in any position, as it contains no acid - contains no heavy metals - balanced discharge / charge of all cells by balancers - Fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max 5% per month) - even at high temperatures still good performance up to 60 ° C - safe technology and long service life
Due to their specific properties, lead-acid batteries can only use 30% of their capacity, while lithium-ion batteries can use almost 100% of their capacity. For this reason, the lithium versions of the Skyrich batteries require only 1/3 the capacity of a comparable lead-acid battery for the same starting power. The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries using adapters. The connections are identical, which is why the battery can be replaced in just a few minutes without any further adjustments.
Please note that only suitable chargers may be used for charging. We recommend JMP chargers. For the maximum recommended charging currents, please refer to the technical data below.
Under no circumstances should chargers be used which attempt to desulphurate deep-discharged batteries under 10 volts with a voltage of more than 14.9 volts before they begin the actual charge. There is a danger of explosion.
The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.
technology Skyrich lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium-polymer process in their manufacture. As a result, they can neither go up in flames nor explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium batteries.
- 12 V maintenance-free lithium-ion battery - Charging current recommended 2 A - maximum charge current for fast charge 20 A
Lithium ion battery with surge protection from Skyrich
Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM and Ducati. The Power Sports LTM-Line lithium-ion batteries are characterized by a heat-resistant, waterproof nylon housing and improved pole connections.
Overcharge protection (OP) The Skyrich battery has an advanced battery management system (BMS), which in addition to the balancers (ensures uniform charge / discharge of the battery) also includes an overvoltage protection. This prevents the battery from being charged with a voltage higher than 14.9V.
Spacer (S) Battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip, so that the battery fits exactly into the battery box.
Waterproof (WP) The battery is completely waterproof and takes no damage when the motorcycle is being cleaned at high pressure.
Indicator (I) All batteries are equipped with an improved charge indicator, which shows the state of charge of the battery even more precisely.
Replacing a standard lead-acid battery with a Skyrich lithium-ion battery can save up to 5 kg in weight, with no significant effort. The following advantages speak for Skyrich lithium-ion batteries: - integrated overvoltage protection - About 1/3 of the weight of the comparable lead-acid battery - improved pole connections made of brass for best conductivity - waterproof - completely black battery case - Battery housing made of nylon, therefore, deformation under heat is practically impossible - Unbeatable cost / weight savings ratio - Can be installed in any position, as it contains no acid - contains no heavy metals - balanced discharge / charge of all cells by balancers - Fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max 5% per month) - even at high temperatures still good performance up to 60 ° C - safe technology and long service life
Due to their specific properties, lead-acid batteries can only use 30% of their capacity, while lithium-ion batteries can use almost 100% of their capacity. For this reason, the lithium versions of the Skyrich batteries require only 1/3 the capacity of a comparable lead-acid battery for the same starting power. The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries using adapters. The connections are identical, which is why the battery can be replaced in just a few minutes without any further adjustments.
Please note that only suitable chargers may be used for charging. We recommend JMP chargers. For the maximum recommended charging currents, please refer to the technical data below.
Under no circumstances should chargers be used which attempt to desulphurate deep-discharged batteries under 10 volts with a voltage of more than 14.9 volts before they begin charging. There is a danger of explosion.
The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.
technology Skyrich lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium-polymer process in their manufacture. As a result, they can neither go up in flames nor explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium batteries.
- 12 V maintenance-free lithium-ion battery - Charging current recommended 2.5 A - maximum charge current for fast charge 22 A
Identical in construction to:
YB16B-A YB16C-B YTX16-BS-1 YB16B-A1YB18-A YTX16-BS Yb16-B-CX HYB16A AB Yb16-B
The Powersports lithium-ion batteries of the LTM-Line are characterized by a heat-resistant, waterproof nylon housing and improved terminal connections.
Indicator (I)
All batteries are equipped with an improved battery indicator, which indicates the status of the battery more accurately.
Simply press the test button to display the charge status of the battery.
By replacing a standard lead-acid battery with a JMT lithium-ion battery up to 5 kg in weight can be saved, without any appreciable effort.
Following advantages speak for JMT lithium-ion batteries:
- About 1/3 of the weight of comparable lead acid battery - Pole connections brass for best conductivity - Waterproof - Completely black battery case - Battery case made of nylon, thus deformation in the heat is practically impossible - Unbeatable ratio of cost / weight saving - Because in any position mountable no acid - Contains no heavy metals - Balanced discharge / charge of all cells by Balancer - Fast charging with high charging current (up to 90% in 6 min) - Very low self-discharge (max. 5% per month) - Even at high temperatures still good performance up to 60 ° C - Safe technology and high durability
Lead-acid batteries can be used only 30% of its capacity due to the specific characteristics, while nearly 100% of the capacity can be used in lithium ion batteries.
For this reason, lithium version of JMT batteries for the same starting power need only 1/3 of the capacity of a comparable lead-acid battery.
A steady state of charge of all cells is also ensured by a built-in processor ( "balancer").
The dimensions of lithium-ion batteries comply with the help of adapters with a size of original lead-acid batteries.
The ports are the same, so the battery can be replaced without further adjustments in a few minutes.
Please note that for charging only suitable chargers may be used. We recommend JMP chargers.
The maximum recommended charge currents please the technical data below refer.
There was no way of chargers may be used, trying to desulfate deeply discharged batteries with 10 volts with a voltage of more than 14.9 volts, before they start the actual charge.
The maximum charging voltage of 14.9 volts may be exceeded in any case. Risk of explosion.
The manufacturer guarantees a sufficient initial capacity of up to -5 degrees Celsius.
technology
JMT use lithium-ion batteries as a cathode material iron phosphate (LiFePO4), and use the lithium-polymer process in the manufacture. This allows them to rise even explode either in flames during normal operation.
The technology and the manufacturing process ensure the highest safety standards for lithium batteries.
Lithium ion battery with surge protection from Skyrich
Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM and Ducati. The Power Sports LTM-Line lithium-ion batteries are characterized by a heat-resistant, waterproof nylon housing and improved pole connections.
Overcharge protection (OP) The Skyrich battery has an advanced battery management system (BMS), which in addition to the balancers (ensures uniform charge / discharge of the battery) also includes an overvoltage protection. This prevents the battery from being charged with a voltage higher than 14.9V.
Spacer (S) Battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip, so that the battery fits exactly into the battery box.
Waterproof (WP) The battery is completely waterproof and takes no damage when the motorcycle is being cleaned with high pressure.
Indicator (I) All batteries are equipped with an improved charge indicator, which shows the state of charge of the battery even more precisely.
By replacing a standard lead-acid battery with a Skyrich lithium-ion battery, you can save up to 5 kg of weight without significant effort. The following advantages speak for Skyrich lithium-ion batteries: - integrated overvoltage protection - About 1/3 of the weight of the comparable lead-acid battery - improved pole connections made of brass for best conductivity - waterproof - completely black battery case - Battery housing made of nylon, therefore, deformation under heat is practically impossible - Unbeatable cost / weight savings ratio - Can be installed in any position, as it contains no acid - contains no heavy metals - balanced discharge / charge of all cells by balancers - Fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max 5% per month) - even at high temperatures still good performance up to 60 ° C - safe technology and long service life
Due to their specific properties, lead-acid batteries can only use 30% of their capacity, while lithium-ion batteries can use almost 100% of their capacity. For this reason, the lithium versions of the Skyrich batteries require only 1/3 the capacity of a comparable lead-acid battery for the same starting power. The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries using adapters. The connections are identical, which is why the battery can be replaced in just a few minutes without any further adjustments.
Please note that only suitable chargers may be used for charging. We recommend JMP chargers. For the maximum recommended charging currents, please refer to the technical data below.
Under no circumstances should chargers be used which attempt to desulphurate deep-discharged batteries under 10 volts with a voltage of more than 14.9 volts before they begin charging. There is a danger of explosion.
The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.
technology Skyrich lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium-polymer process in their manufacture. As a result, they can neither go up in flames nor explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium batteries.
- 12 V maintenance-free lithium-ion battery - Charging current recommended 3 A - maximum charge current for fast charge 24 A
- Maintenance-free JMT starter battery in proven and reliable brand quality. - the battery is already filled with a gel electrolyte and therefore absolutely leak-proof. - longer service life, increased cold start performance and lower self-discharge compared to standard batteries. - Vibration resistant
Identical in construction to:
JM Manufacturer number YTX14-BS Varta Manufacturer number 51214LF GS Manufacturer number GTX14-BS FB manufacturer number FTX14-BS Exide manufacturer number ETX14-BS
Lithium-ion batteries by JMT, High-technology for your motorcycle.
The latest generation of batteries are identified by the red cover.
Spacer (S) Batteries may be equipped with one or more spacers that are taped with adhesive tape under the battery so that the battery fits exactly into the original battery box.
Indicator (I) All batteries are equipped with a battery condition indicator. Simply press the test button. When all three blue LEDs light up the battery is fully charged(ful). If it lights only 2 LEDs, it is only half charged (med). When only one LED is lit (low), the battery must be charged immediately.
Replacing a standard lead-acid battery by a JMT lithium-ion batter can save you up to up to 5 kg in weight with minimum effort.
JMT lithium-ion batteries have the following benefits: - About 1/3 of the weight of comparable lead acid battery - Unbeatable ratio of cost/weight savings - Can be mounted in any position - no acid spillage - Does not contain heavy metals - Balanced discharge/charge of all cells by the integral balancer - Fast charging with high ampage systems (up to 90% fully charged in only 6 minutes) - Very low self-discharge - long shelf life (up to 5% per month) - Excellent performance at high temperatures (even up to 60° C) - Safe technology and high durability
Lead-acid batteries only use 30% of their capacity whilst nearly 100% of the capacity of lithium-ion batteries is used. For this reason, lithium versions of JMT batteries need only 1/3 of the capacity of a comparable lead-acid battery for the same starting power.
A uniform charging of all the cells is ensured by a built-in processor (the "balancer").
The dimensions of the lithium-ion batteries (using adapters where necessary)correspond to the dimensions of the original lead-acid batteries and the connections are identical, thus the battery can be replaced easily in a few minutes.
*** IMPORTANT ***
Please note that only suitable battery chargers are used, such as the JMP 800, JMP 4000 or the corresponding workshop equipment. Please ensure that a compatible charger is used as a wrong charger will invalidate the 2 year warranty.
For fast charging, we recommend the JMP 30000 workshop unit. With this a lithium-ion battery can be charged up to 90% within 6 minutes. For the maximum recommended charging currents please refer to the technical data below.
In no case must chargers be use that have a de-sulphate mode for deeply discharged batteries (i.e showing 10 volts or less) These chargers use an output of more than 14.9 volts before they begin the actual charging cycle. The maximum charging voltage of 14.9 volts must not be exceeded in any case, as in extreme circumstances there can be a danger of explosion.
Although this lightweight battery is extremely suitable for everyday use, it should be noted that the starting capacity is reduced at temperatures below zero degrees Celsius.
Technology - JMT lithium-ion batteries are manufactured using a cathode material of iron phosphate (LiFePO4) and lithium-polymer.
The technology and the manufacturing process ensure the highest safety standard for lithium batteries.
- 12 V maintenance-free lithium-ion battery - Recommended charging current 2.0 A - Maximum charging current for fast charging 20 A
Comparable in moderation and connections with: Yuasa Mfr No. YTX14H-BS YTX14-BS
OSRAM Ultra Life Holds up to four times longer than a conventional lamp Unique reliability Accepted throughout Europe, for all vehicle types Applications: license plate and side position lights, interior lighting and reading light, rear, brake and fog lights OSRAM ULTRA LIFE - now with 4 years warranty A nuisance for motorists: In the middle of the night one of the headlight bulbs suddenly fails. Quick replacement must be worried and installed, because a defective lamp is a high security risk. Especially drivers who travel a lot at night or even during the day want to give up the safety of the low beam, know this situation. Due to the constant use the lamps in their vehicles are more frequent than usual. The solution is ULTRA LIFE lamps, which shine up to three times as long as conventional car lamps. For ULTRA LIFE headlamps in non-commercial use, OSRAM is the first manufacturer to offer a three-year warranty (exact conditions) www.osram.de/am-garantie). Even owners of vehicles whose headlights and lamps are difficult to access save effort and expense with the new ULTRA LIFE long-lasting burners. And the environment also benefits from these advantages: Rare lamp changes mean less waste. The ULTRA LIFE also scores points in the design. For lamp types with cover cap, this is silver and fuses optically with the reflectors of the headlights. This ensures especially for clear glass headlights for a corresponding High quality impression. The long-life auxiliary light lamps ULTRA LIFE complete the assortment.
OEM Convincing brightness and reliability Applications: license plate and side marker lights, interior lighting and reading light, rear, brake and fog lights
For the first time on a brand car lamp 3 years warranty Lasts up to three times longer than a standard car lamp Unique reliability Approved throughout Europe; for all vehicle types Applications: license plate and side marker lights, interior lighting and reading light, rear, brake and fog lights
OSRAM ULTRA LIFE - now with 3 years warranty One annoyance for motorists: Middle of the night suddenly falls from one of the headlamps. Spare Quick must be obtained and installed, because a defective lamp is a high security risk. Drivers who are traveling a lot at night or who do not want to do without the safety of dipped headlights even during the day are especially aware of. Due to the constant use of the lamps in their vehicles fail more often than usual. The solution is ULTRALIFE lamps up to three times as long as conventional light bulbs car. For ULTRA LIFE headlamps in non-commercial use OSRAM is the first manufacturer to even a three-year warranty (exact conditions under www.osram.de/am-garantie). Owners of vehicles whose headlamps and lights are difficult to access, to trouble and expense with the new ULTRA LIFE evergreens spare. And of these benefits also benefits the environment: Rare lamp replacements mean less waste. When designing the ULTRALIFE can also score. For lamp types with Abdeckkuppe this is designed Silver and merges visually with the reflectors of headlights. This ensures especially in clear-glass headlights for a correspondingly high-quality impression. The durable auxiliary lamps ULTRALIFE complete the range.
OEM. Convincing brightness and reliability. Applications: Position and parking lights, number plate and side marker lights, interior lighting and reading light, meter lights and switches
Athena, an international company founded in 1973, develops and manufactures seals, technical spare parts and metal components for the industrial and motorcycle sector according to the highest quality standards UNI EN ISO 9001, 9002, 14001 and UNI ISO / TS 16949.
Athena is the reference point in the market for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs and Harley Davidson.
In the off-road world, the Athena pool of engineers and technicians is developing new product lines in collaboration with key international teams from MXGP and AMA Supercross.
Athena products undergo rigorous quality testing to ensure customers high standards of performance, competitiveness and reliability.
Athena offers the widest range of replacement seals available on the market, with more than 40 years of industry experience. Athena Sealing Kits are based on in-depth know-how, continuous technological development achieved by our in-house team of engineers and designers, and production geared strictly to the parameters required by OEMs.
Athena offers a range of seals with excellent sealing properties, available in sheets of paper, cellulose, metal and rubber and in various thicknesses to meet customer requirements.