Battery pole distributor for easy access to the motorcycle battery. Simply connect to both poles and in the future additional devices such as navigation devices or sockets for mobile phone chargers can easily be connected additionally.
- Protected connections -Easy construction -supply for + line - Length: 10 cm
Fully insulated bike battery master switch for the onboard power supply enclosure to the Discharge of the battery through constant consumer as clock, trip computer, Etc. to avoid accessory during longer breaks. By simply loosening the screw, the separation is already achieved. The screw simply loosen 1-2 turns and leave the switch. Thus they can not be lost as well. For driving please correct firmly turn.
Mini design Fully insulated housing Flexible mounting between negative and vehicle
Load max. 160A - 12V / 10 sec pause then 30 sec.. Bridge cable included. Installation instructions on product depositors
Dimensions: L / W / H: 62 x 25 x 38 mm Cable: 200 mm
Lithium ion battery with surge protection from Skyrich
Skyrich is a premium manufacturer and series supplier for well-known manufacturers such as KTM and Ducati. The Power Sports LTM-Line lithium-ion batteries are characterized by a heat-resistant, waterproof nylon housing and improved pole connections.
Overcharge protection (OP) The Skyrich battery has an advanced battery management system (BMS), which in addition to the balancers (ensures uniform charge / discharge of the battery) also includes an overvoltage protection. This prevents the battery from being charged with a voltage higher than 14.9V.
Spacer (S) Battery is equipped with one or more spacers, which are glued under the battery with the supplied adhesive strip, so that the battery fits exactly into the battery box.
Waterproof (WP) The battery is completely waterproof and takes no damage when the motorcycle is being cleaned with high pressure.
Indicator (I) All batteries are equipped with an improved charge indicator, which shows the state of charge of the battery even more precisely.
By replacing a standard lead-acid battery with a Skyrich lithium-ion battery, you can save up to 5 kg of weight without significant effort. The following advantages speak for Skyrich lithium-ion batteries: - integrated overvoltage protection - About 1/3 of the weight of the comparable lead-acid battery - improved pole connections made of brass for best conductivity - waterproof - completely black battery case - Battery housing made of nylon, therefore, deformation under heat is practically impossible - Unbeatable cost / weight savings ratio - Can be installed in any position, as it contains no acid - contains no heavy metals - balanced discharge / charge of all cells by balancers - Fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max 5% per month) - even at high temperatures still good performance up to 60 ° C - safe technology and long service life
Due to their specific properties, lead-acid batteries can only use 30% of their capacity, while lithium-ion batteries can use almost 100% of their capacity. For this reason, the lithium versions of the Skyrich batteries require only 1/3 the capacity of a comparable lead-acid battery for the same starting power. The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries using adapters. The connections are identical, which is why the battery can be replaced in just a few minutes without any further adjustments.
Please note that only suitable chargers may be used for charging. We recommend JMP chargers. For the maximum recommended charging currents, please refer to the technical data below.
Under no circumstances should chargers be used which attempt to desulphurate deep-discharged batteries under 10 volts with a voltage of more than 14.9 volts before they begin charging. There is a danger of explosion.
The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.
technology Skyrich lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium-polymer process in their manufacture. As a result, they can neither go up in flames nor explode during normal operation. The technology and the manufacturing process guarantee the highest safety standard for lithium batteries.
- 12 V maintenance-free lithium-ion battery - Charging current recommended 2 A - maximum charge current for fast charge 20 A
- Maintenance-free JMT starter battery in proven and reliable brand quality. - The battery is already filled with a gel electrolyte and therefore absolutely leak-proof. - Longer life, increased cold-start performance and lower self-discharge compared to standard batteries. - Rattle Festival
Attention: for connection from above adapter 707.37.03 must be ordered separately.
Identical in construction to:
JM manufacturer number YB12A-A Varta manufacturer number 51211 GS manufacturer number GM12AZ-4A1, CB12A-A FB manufacturer number FB12A-A Fiamm manufacturer number 6S3P Exide manufacturer number EB12A-A
- Maintenance-free JMT starter battery in proven and reliable brand quality. - the battery is already filled with a gel electrolyte and therefore absolutely leak-proof. - longer service life, increased cold start performance and lower self-discharge compared to standard batteries. - Vibration resistant
- High power starter battery in reliable brand quality - High-performance glass fiber mats protect against vibration damage - Thanks to thin special separators in additional plates, the battery receives up to 30% higher cold starting power - Continuous cell connectors minimize the internal resistance and increase the performance - Sulfate-Stop significantly restricts the plate sulphation - By a connected battery housing prevents leakage and corrosion - Dry unfilled - An acid pack with the appropriate quantity of acid for initial filling is available separately
Restriction for Honda VFR 750 F Construction year 1996 to Chassis No. .. 2009620
Identical in construction to:
JM Manufacturer number YB12A-B Varta Manufacturer number 51215 GS manufacturer number GM12AZ-4B-2
OSRAM Ultra Life Holds up to four times longer than a conventional lamp Unique reliability Accepted throughout Europe, for all vehicle types Applications: license plate and side position lights, interior lighting and reading light, rear, brake and fog lights OSRAM ULTRA LIFE - now with 4 years warranty A nuisance for motorists: In the middle of the night one of the headlight bulbs suddenly fails. Quick replacement must be worried and installed, because a defective lamp is a high security risk. Especially drivers who travel a lot at night or even during the day want to give up the safety of the low beam, know this situation. Due to the constant use the lamps in their vehicles are more frequent than usual. The solution is ULTRA LIFE lamps, which shine up to three times as long as conventional car lamps. For ULTRA LIFE headlamps in non-commercial use, OSRAM is the first manufacturer to offer a three-year warranty (exact conditions) www.osram.de/am-garantie). Even owners of vehicles whose headlights and lamps are difficult to access save effort and expense with the new ULTRA LIFE long-lasting burners. And the environment also benefits from these advantages: Rare lamp changes mean less waste. The ULTRA LIFE also scores points in the design. For lamp types with cover cap, this is silver and fuses optically with the reflectors of the headlights. This ensures especially for clear glass headlights for a corresponding High quality impression. The long-life auxiliary light lamps ULTRA LIFE complete the assortment.
OEM Convincing brightness and reliability Applications: license plate and side marker lights, interior lighting and reading light, rear, brake and fog lights
OEM. Convincing brightness and reliability. Applications: Position and parking lights, number plate and side marker lights, interior lighting and reading light, meter lights and switches
Athena, an international company founded in 1973, develops and manufactures seals, technical spare parts and metal components for the industrial and motorcycle sector according to the highest quality standards UNI EN ISO 9001, 9002, 14001 and UNI ISO / TS 16949.
Athena is the reference point in the market for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs and Harley Davidson.
In the off-road world, the Athena pool of engineers and technicians is developing new product lines in collaboration with key international teams from MXGP and AMA Supercross.
Athena products undergo rigorous quality testing to ensure customers high standards of performance, competitiveness and reliability.
Athena offers the widest range of replacement seals available on the market, with more than 40 years of industry experience. Athena Sealing Kits are based on in-depth know-how, continuous technological development achieved by our in-house team of engineers and designers, and production geared strictly to the parameters required by OEMs.
Athena offers a range of seals with excellent sealing properties, available in sheets of paper, cellulose, metal and rubber and in various thicknesses to meet customer requirements.